Task 3: Delete The Task; Others; Restoring Default Dome Setup - Observint The BLACK Line BLK-PTZ36X User Manual

4.8.3 TASK 3: Delete the task.

To delete a task, move the cursor to CLEAN TASK and click IRIS+ to delete the time and action of the current task.

4.9 Others

4.9.1 Restoring default dome setup

You can reset all dome settings to factory default parameters as shown in the table below. Dome settings include mostly PTZ
parameters and some system settings, for example, the dome address.
Open the default dome settings menu. Go to MAIN MENUS g RESTORE DEFAULTS
1.
2. Click IRIS+ to restore the dome settings to the values shown in the table below, or click IRIS- to exit.
Table 3. Default dome settings
Preview the time task
Parameters
Dome address
Baud rate
Soft address
Initial Position
Auto-focus
Zoom limit
Zoom speed
SECTION 4: USING THE OSD MENUS
Default Value
0
2400 bps
Off
Zero angle
On
Max. Optical Zoom
High
36x PTZ Dome Camera User Manual 39