Table of Contents
Advertisement
SECTION 2: INSTALLATION
Camera
2.
Connect the network power and ground, RS-485, and video cables to the camera drop cable connectors.
3.
Connect the network power and ground, RS-485, and video cables to the remote control device and 24 Vac power source.
4.
Connect the video output and RS-485 and video output cables to your network extension cables. Connect the other end of
these cables to a remote control device, such as a DVR.
5.
When power is applied to the camera, a system information display will appear for 2 minutes on top of the live video image
from the camera. Verify that the information on the display is intelligible.
14
Remote control device (DVR)
Drop cable connections
Network cabling
Camera drop cable
Monitor
24 Vac
Ground
24 Vac
RS-485 –
RS-485 +
Video output
Advertisement
Table of Contents
