Table of Contents
Advertisement
2.
Choose the pattern number:
a.
Move the cursor to PATTERN NUM and click IRIS+ to enter edit mode.
b.
Click the up and down direction buttons to select the number of the pattern you want to configure.
c.
Click IRIS+ again to confirm.
3.
Edit the pattern.
a.
Move the cursor to <PATTERN SETUP> and click IRIS+ to enter edit mode.
b.
Click the PTZ control buttons and direction buttons to pan, tilt, or zoom in/out the camera to draw a movement path.
The camera can automatically memorize the path you enter as a pattern.
Patterns configuration menu
Edit pattern
36x PTZ Dome Camera User Manual
SECTION 4: USING THE OSD MENUS
35
Advertisement
Table of Contents
