Configuring System Information; Checking System Information; Configuring System Parameters - Observint The BLACK Line BLK-PTZ36X User Manual

Click IRIS+ to confirm the change or click IRIS- to cancel and restore the original value. The diamond mark will change back
3.
to be stuffed or half stuffed icon.

4.2 Configuring System Information

4.2.1 Checking System Information

System information menu displays the current system information of the camera including the model, address, protocol, etc. The
information shown on this submenu is similar to the system information shown after camera power-up.
To open the system information display menu, go to MAIN MENUS g SYS INFO
The SYS INFO display is presented for Information only. It cannot be edited directly.
NOTE

4.2.2 Configuring system parameters

You can check and edit the system information including software address, baud rate, system time, etc. on the system information
settings menu.
To enter the system information settings menu, go to MAIN MENUS g DOME SETUP g SYS PARAMETER SETUP
Typical System Information display
SECTION 4: USING THE OSD MENUS
36x PTZ Dome Camera User Manual 21