4.6 Configuring Patrols
A patrol is a memorized series of preset function. It can be set and previewed on the patrol settings interface.
4.6.1 TASK 1: Set a patrol
You can configure up to 8 patrol numbers.
1.
Open the patrol configuration submenu. Go to MAIN MENUS g DOME SETUP g PATROLS SETUP
2.
Edit a patrol:
Move the cursor to PATROL SETUP, then lick IRIS+ to enter edit mode.
a.
b.
Click the up and down direction buttons to select the number of the patrol which is to be edited.
SECTION 4: USING THE OSD MENUS
Patrol Setup menu
36x PTZ Dome Camera User Manual
33