Task 1. Configure The Focus Settings; Task 2. Configure The Zoom Limit - Observint The BLACK Line BLK-PTZ36X User Manual

SECTION 4: USING THE OSD MENUS

4.3.1 TASK 1. Configure the focus settings

Setting the focus mode
•
Move the cursor to FOCUS using the direction buttons and click IRIS+ to change the cursor to totally hollow.
a.
b. Click up/down direction buttons to choose the focus mode as AF, MF or HAF.
AF (Auto-focus): The lens remains in focus during PTZ movements.
MF (Manual Focus): You need to adjust the focus with FOCUS+ and FOCUS- buttons manually.
HAF (Half-auto Focus): The camera focuses automatically only once after panning, tilting and zooming.
c. Click IRIS+ button to save the settings.
Setting the focus limit. This function is used to limit the minimum focus distance. You can configure the focus limit to a
•
longer distance when the target is at a distance to prevent the camera from focusing on the objects close to it; or configure the
focus limit to a shorter distance when the target is near the camera to prevent it from focusing on objects father away. You can
set the FOCUS LIMIT to 1CM, 30CM, 1M, 3M, 5M, 20M, or AUTO.

4.3.2 TASK 2. Configure the zoom limit

Setting the zoom limit. Zoom limit is a user-defined limitation of the zoom amount.
•
Move the cursor to ZOOM LIMIT using the direction buttons and click IRIS+ to open the submenu.
a.
b. Click the up or down direction buttons to choose the limit.
24
Camera Setup