Table of Contents
Advertisement
Image freeze
This feature enables the live view to switch directly from one scene defined by a preset to another, without showing the middle
areas between these two, to ensure the surveillance efficiency. It can also reduce the use of bandwidth in a digital network system.
To enable this function, set IMAGE FREEZE to ON.
PTZ speed
You can define the speed of the dome movements in the SPEED SETUP submenu.
DOME SPEED: the manual movement speed can be set to HIGH, MID or LOW.
SCAN SPEED: scan speed defines the scan degree per second of a panning scan, tilting scan, frame scan, random scan and
panoramic scan. Scan speed is adjustable from 1 to 40 degrees per second.
PRESET SPEED: the speed of calling a preset can be set from level 1 to 8. The higher levels will call a preset faster.
Limit stops
The camera can be programmed to move within the configurable limit stops (left/right, up/down). To set these limits:
1.
Move the cursor to LIMIT SETUP in PTZ PARAMETER SETUP menu, then click IRIS+ to open the submenu.
Move the cursor to LIMIT STATUS, click IRIS+ to set it ON to enable the feature.
2.
SECTION 4: USING THE OSD MENUS
Limit Setup menu
36x PTZ Dome Camera User Manual
31
Advertisement
Table of Contents
