Task 3: Set The Day/Night Mode; Task 4: Set Digital Noise Reduction; Task 5: Set The Sharpness Level; Task 6: Set The Wdr Function - Observint The BLACK Line BLK-PTZ36X User Manual

Click IRIS+ to confirm your settings.
c.

4.3.3 TASK 3: Set the Day/Night Mode

IR cut filter. This filter It can be configured as AUTO, DAY or NIGHT.
•
AUTO: The camera switches automatically from Black and White mode (NIGHT) and Color mode (DAY) in response to
lightening conditions (default).
NIGHT (B/W): The IR cut filter will switch to NIGHT mode to increase the sensitivity in low light conditions.
DAY (Color): The IR cut filter will perform in DAY mode (normal lighting conditions).
You can also call preset 39 to set the IR cut filter mode to DAY mode and call preset 40 to set it as NIGHT mode.
NOTE

4.3.4 TASK 4: Set Digital noise reduction

To reduce the image noise, you can set the NOISE REDUCE function OFF or ON.

4.3.5 TASK 5: Set the sharpness level

The sharpness function can increase the gain of the image and sharpen the edges in the picture to enhance the picture details. You
can set the SHARPNESS level from 0 to 15.

4.3.6 Task 6: Set the WDR function

To set the WDR, open the ADVANCED SETUP menu. Go to MAIN MENUS g DOME SETUP g CAMERA SETUP g ADVANCED
SETUP
SECTION 4: USING THE OSD MENUS
36x PTZ Dome Camera User Manual 25