2.
Choose the task number.
a.
Move the cursor to TASK NUM and click IRIS+ to enter edit mode.
b.
Click the up and down direction buttons to select the task number you want to configure.
c.
Click IRIS+ again to confirm and exit edit mode.
3.
Set the task status.
a.
Move the cursor to TASK STATUS and click IRIS+ to enter edit mode.
Click the up and down direction buttons to set the task status to ON.
b.
c.
Click IRIS+ again to confirm and exit edit mode of this column.
4.
Configure the task action.
a.
Move the cursor to TASK ACTION and click the IRIS+ to enter edit mode.
b.
Click the up and down direction buttons to select the task action from preset 1 to 8, pattern 1 to 4, patrol 1 to 8,
panning scan, tilting scan, random scan, frame scan, panoramic scan, day mode, night mode or none.
c.
Click IRIS+ again to confirm and exit edit mode of this column.
5.
Set the task time.
a.
Move the cursor to TASK TIME and click IRIS+ to enter edit mode.
Time Task configuration menu
36x PTZ Dome Camera User Manual
SECTION 4: USING THE OSD MENUS
37