Camera.mode; Exposure - Observint Black BLK-HDC10 User Manual

3.2 CAMERA MODE
CAMERA MODE: Select mode type: D&N (day and night) / COLOR / IR SMART / IR CDS. The mode selected affects the content of
some displays.

3.3 EXPOSURE

To open the EXPOSURE menu, rock the joystick down (or up) to highlight EXPOSURE, then press the joystick down (set, select).
BRIGHTNESS: Adjust brightness level: 0 (dark) ~ 20 (bright) steps
•
LENS: DC / MANUAL
•
SHUT SPEED: Can be set in AUTO or MANUAL: AUTO / 1/30 (25), 1/60 (50), 1/120 (100), 1/240, 1/500, 1/1000, 1/2000,
•
1/4000, 1/8000, 1/16000,1/30000, 1/60000 s
FLICKERLESS: Set to ON or OFF for best performance. Normally OFF.
•
DSS: Select maximum DSS (Digital Slow Shutter): OFF / x2, x3, x4
•
AGC: Select Auto Gain Control OFF / ON
•
WDR/BLC: Select WDR (Wide Dynamic Range) or BLC (Back Light Compensation). NOTE: When WDR is ON, ACE and DEFOG
•
function will not turn on.
WEIGHT: Adjust WDR level 0 ~ 3
—
BLC
•
AREA: Control BLC area according to light condition.
—
POS-X: Adjust the window X-Axis position
—
POS-Y: Adjust the window Y-Axis position
—
SIZ-X: Adjust the window X-Axis size
—
SIZ-Y: Adjust the window Y-Axis size
—
DAY&NIGHT: Select Day&Night. The MODEL mode determines content of the DAY&NIGHT submenu.
•
D&N Model
AUTO / DAY / NIGHT / EXT
—
Delay: 0 ~ 255 second
»
BURST: OFF / ON
»
THRS: LOW / MIDDLE / HIGH. Select Day&Night change level. Higher level make the night mode changed in lower
»
illumination.
GAP: LOW / MIDDLE / HIGH: Select Day to Night mode change and Night to Day mode change.
»
SECTION 3: CONFIGURATION SETUP
2 MP Full HD C-Mount Box Camera User Manual 9