Table of Contents
Advertisement
Community Name - Enter the name of current strings.
Write Access – Determine the rights. Choose between:
o Read only - Read only enables requests accompanied by this string to display
MIB-object information.
o Read/Write – Read/write enables requests accompanied by this string to display
MIB-object information and to set MIB objects.
4.45
Trap Managers
A trap manager is a management station that receives traps or system alerts generated
by the switch. If no trap manager is defined, no traps are received. To create a trap
manager, enter the IP address of the station and a community string.
4.45
GVRP
The GVRP Menu allows you to enable and disable the GVRP (VLAN Registration
Protocol). GVRP is disabled by default.
4.46
LACP
The LACP Configuration Menu provides the following options:
Aggregator Setting
State Activity
LACP Status
4.46.1
Aggregator Setting
Group:
Display the trunk group ID.
LACP:
Use the Space bar to enable or disable LACP (Link Aggregation Control
Protocol) support. If it is enabled, the group is LACP static trunking group. If it is
disabled, the group is local static trunking group.
LACP Work Port Num:
aggregated at the same time. If LACP is set to static trunking group, the additional
ports are on standby and able to aggregate if a work port fails. If it is set to local static
trunking group, the number must be the same as group ports.
NOTE: Before setting LACP support, you have to set the trunk group.
4.46.2
State Activity
Active:
The port automatically sends LACP protocol packets.
Passive: The port does not automatically send LACP protocol packets, and
Waters Network Systems
This setting is the maximum number of ports that can be
User's Manual
PSX/MS1008 Models with Gigabit Uplink
Page 32
Advertisement
Table of Contents
