5.6 Lacp Setting - Waters Network Systems PSX1008-GTX Operating Manual

standard.
Filter database
VLAN configuration
Spanning Tree
Port Mirror
SNMP
Security Manager
TFTP Update Firmware
Configuration Backup
Reset System and Reboot.

5.6 LACP Setting

The system priority value is used to identify the active LACP. The switch with the
lowest value has the highest priority and is selected as the active LACP.
1. Group ID - A link aggregation can be created across two or more ports. Select
the Group ID and then click on Get.
2. LACP – If enabled, the group is the LACP static trunking group. If it is disabled,
the group is the local static trunking group.
3. All ports support LACP dynamic trunking group. If connecting to a device that
also supports LACP, the LACP dynamic trunking group will be created
automatically.
4. Work ports - The maximum number of ports can be aggregated at the same
time. If LACP static trunking group, the ports exceeding the maximum are on
Waters Network Systems User's Manual
PSX/MS1008 Models with Gigabit Uplink
Page 38