Basic Vlan Setting - Waters Network Systems PSX1008-GTX Operating Manual

5.96

Basic VLAN Setting

To create a VLAN and add tagged member ports:
1. From the Main Menu, select Administrator.
2. Select VLAN Configuration.
3. Click the Add button.
4. Type a name for the new VLAN.
5. Type a VID (between 2-4094). (The default is 1.)
6. From the Available Ports field, select the ports to include in the VLAN.
7. Select Add.
8. Click Apply.
To configure port VID settings:
1. From the Main Menu, select Tag-based (IEEE 802.1Q) VLAN page.
2. Select Port VID Settings.
Port VID (PVID) - Sets the Port VLAN ID that will be assigned to untagged traffic on a
given port. For example, if port 9's Default PVID is 100, all untagged packets on port 9
will belong to VLAN 100. The default setting for all ports is VID 1. This feature is useful
for accommodating devices that you want to participate in the VLAN but that don't
support tagging. Only one untagged VLAN is allowed per port.
Waters Network Systems User's Manual Page 46
PSX/MS1008 Models with Gigabit Uplink