Waters Network Systems PSX1008-GTX Operating Manual page 49

The following table describes the Spanning Tree parameters.
Parameter
Priority
Max Age
Hello Time
Forward Delay
time
The following parameters can be configured on each port. Click the Apply button
to modify.
Waters Network Systems
Description
You can change the priority value which is a value used to
identify the root bridge. The bridge with the lowest value has
the highest priority and is selected as the root. Enter a
number 1 through 65535.
You can change Max Age value, which is the number of
seconds a bridge waits without receiving Spanning-Tree
Protocol configuration messages before attempting a
reconfiguration. Enter a number 6 through 40.
You can change Hello time value which is the number of
seconds between the transmissions of Spanning-Tree
Protocol configuration messages. Enter a number 1
through 10.
You can change forward delay time, which is the number of
seconds a port waits before changing from its Spanning-Tree
Protocol learning and listening states to the forwarding state.
Enter a number 4 through 30.
User's Manual
PSX/MS1008 Models with Gigabit Uplink
Page 49