Trap Configuration - Waters Network Systems GSM2109-1009-8PoE Operating Manual

information
• Read/write – enables requests accompanied by this string to display MIB-object
information and set MIB objects
Click Add.
To remove the community string, select the community string to be removed, and
click Remove. You cannot remove the default community string set.
Agent Mode - select the SNMP version that you want to use.
Click Change to switch to the selected SNMP version mode.
5.25.2

Trap Configuration

A trap manager is a management station that receives traps or system alerts generated
by the switch. If a trap manager is not defined, no traps received. Create a trap
manager by entering the IP address of the station and a community string. To define a
trap manager, enter the following information.
IP Address - enter the IP address of the trap manager.
Community - enter the community string.
Trap Version - select the SNMP version – v 1 or v2.
Waters Network Systems
Figure 5.32 – SNMP Configuration
GSM2109-1009-8PoE User's Manual Page 61