Vlan Configuration; Creating A Vlan Group - Waters Network Systems PSX1008-GTX Operating Manual

4.32

VLAN Configuration

The VLAN Configuration Menu can be accessed from the Switch Static
Configuration Menu. VLANs are disabled by default. Once you have enabled VLANs,
you may choose between the following:
802.1q
802.1q with GVRP
Port-based
PVID (Port VID): Set the port VLAN ID that will be assigned to untagged traffic on a
given port. This feature is useful for accommodating devices that you want to participate
in the VLAN but that don't support tagging. Only one untagged VLAN is allowed per port.
Ingress Filter 1: Forward only packets with VIDs matching this port's configured VID.
Use the Space bar to choose to forward or drop the frame that the VID does not match
this port's configured VID.
Ingress Filter 2: Drop untagged frame. Use the Space bar to choose drop or forward
the untagged frame. Once you have set VLANs to enabled, you are ready to create a
VLAN group.
4.33

Creating a VLAN Group

1. Select Create a VLAN Group from the VLAN Configuration Menu.
2. Provide the following information for the VLAN:
VLAN Name:
VLAN ID:
Protocol VLAN: Press the Space bar to choose the type of protocol.
Waters Network Systems
Type a name for the new VLAN.
Type a VID (between 2~4094). The default is 1.
User's Manual
PSX/MS1008 Models with Gigabit Uplink
Page 24