Trap Configuration - Waters Network Systems GSM2109 Operating Manual

information
• Read/write – enables requests accompanied by this string to display MIB-object
information and set MIB objects
Click Add.
To remove the community string, select the community string to be removed, and
click Remove. You cannot remove the default community string set.
Agent Mode - select the SNMP version that you want to use it.
5.26.2

Trap Configuration

A trap manager is a management station that receives traps or system alerts generated
by the switch. If a trap manager is not defined, no traps are received. Create a trap
manager by entering the IP address of the station and a community string. To define a
trap manager, enter the following information.
Trap Manager IP - enter the IP address of the trap manager.
Community Name - enter the community string.
Ver. - select the SNMP version – v 1 or v2.
Click Add - to save the settings.
Waters Network Systems
Figure 5.29 – SNMP Management
GSM2109/GSM1009-SFP User's Manual Page 72