Edit / Delete A Vlan Group; Priority Configuration - Waters Network Systems PSX1008-GTX Operating Manual

Un-Tagged:
Tagged:
No:
4.34

Edit / Delete a VLAN Group

To edit or delete a VLAN group, use the following instructions.
1. Select Edit/Delete a VLAN Group from the VLAN Configuration Menu.
2. Choose the VLAN group that you want to edit or delete and then press Enter.
3. You can modify the configuration for the VLAN.
4. Remember to choose Save once you have completed your modifications or VLAN
deletions so all configuration values are saved.
Note: You cannot modify the default VLAN Name and VLAN ID, and you cannot delete
the default VLAN.
4.35

Priority Configuration

Levels 0~7 can be set to high or low queue service
High/Low Queue Service Ratio H: L:
packets and low priority packets.
o First In First Out: The sequence of packets sent depends on the order
of arrival.
o High to Low: The high priority packets are sent before low priority
packets.
o Ratio H: L: Select the preference given to packets in the switch's
high-priority queue.
Waters Network Systems
Assign untagged to the port.
Assign tagged to the port.
The port is not a member of this VLAN group.
User can select the ratio of high priority
User's Manual
PSX/MS1008 Models with Gigabit Uplink
Page 25