Hardware Features - Waters Network Systems PSX1008-GTX Operating Manual

Managed switch with eight 10/100base-tx ports plus one gigabit port
Table of Contents

Advertisement

providing the 100Mbps bandwidth required for multimedia applications. All RJ45 ports
support the Auto MDI/MDIX function.
With the built-in Web-based management functionality, managing and configuring the
switch is easy. From cabinet management to port-level control and monitoring, you can
visually configure and manage your network via your Web Browser. Just click your mouse
instead of typing command strings. The 1008 switch can be managed via Telnet, Console,
or SNMP Management.
Ethernet switching technology dramatically boosted the total bandwidth of a network,
eliminating congestion problems inherent with the carrier sense multiple access with the
collision detection (CSMA/CD) protocol and greatly reduced unnecessary transmissions.
This revolutionized networking. First, by allowing two-way, simultaneous transmissions
over the same port (full-duplex), bandwidth was essentially doubled.
reducing the collision domain to a single switch-port, the need for carrier sensing was
eliminated. Third, by using the store-and-forward technology's approach of inspecting
each packet to intercept corrupt or redundant data, switching eliminated unnecessary
transmissions that slow down network traffic.
Auto-negotiation regulates the speed and duplex of each port, based on the capability of
both devices. Flow-control allows transmission from a 100Mbps node to a 10Mbps node
without loss of data. Auto-negotiation and flow-control may have to be disabled for some
networking operations that involve legacy equipment. Disabling the auto-negotiation is
accomplished by hard setting the speed or duplex mode of a port.
3.1

Hardware Features

Conforms to IEEE 802.3, 802.3u, and 802.3x Ethernet Standards
Auto-sensing 10/100Base-TX RJ45 port ports
Automatic MDI/MDIX crossover for each 10/100Base-TX port
1 Fixed Gigabit uplink port
Console port on rear side for system configuration
Half-duplex mode for backpressure
Full-duplex for flow control
Waters Network Systems
User's Manual
PSX/MS1008 Models with Gigabit Uplink
Second, by
Page 8

Advertisement

Table of Contents
loading

Table of Contents