Privacy - Toshiba IPEDGE User Manual

Group Page
All Call Page
SIP terminals as
paged device
Set SIP Station for
Paging
Answer All Call Page
Emergency Page

Privacy

IPedge UG 12/15
is Emergency Paging.
To answer a Group Page, lift the handset off-hook, dial #5#36 and enter the
Page Zone number (01~08, depending on your telephone system).
You can make an All Call Page to telephones assigned to the "All Call Page
Group." Stations are assigned to the "All Call Page Group" in system
programming.
To make an All Call Page:
1. With the handset off-hook, press All Call Page
— or —
Dial #30. This pages all telephones in the All Call Page Group, not the
external speakers. Paging external speakers requires a separate action.
2. Announce the page and hang up the handset.
SIP stations may be set as a paged device, provided they support this feature.
IPedge will disconnect the terminating call and drop SIP terminal from the list of
paging group if SIP terminal returns busy or busy no answer at terminating.
To answer the paged call, the user will seize a different line and enter the feature
access code. To originate a page, enter the paging access code.
Certain SIP terminals may accept a paged call if the phone supports paging, and
the feature is enabled. IPTs belonging to the same group will also hear the paging
call.
If the SIP phone does not support paging, IPedge will disconnect the call on that
SIP terminal. However, members of the same paging group will continue to hear
the paging call.
1. Lift the handset off-hook, dial #5#36.
2. Enter the Page Zone Number (01~08, depending on your telephone system).
An Emergency Page overrides Group Pages or All Call Pages to telephones only.
To make an Emergency Page, lift the handset off-hook, dial #37.
•
To make an Emergency Page to a group, lift the handset off-hook, dial #38
•
and enter the Group number.
Privacy controls the ability of more than one person to use the same extension at
the same time. Privacy applies to multiple appearances of extensions, Phantom
extensions, outside Lines, and outside Line Group buttons. The application of
Privacy to individual telephones is controlled in system programming.
By default, the system is private. If you are in a conversation, another telephone
with an appearance of the line on which you are talking cannot intrude unless that
telephone has been programmed for Privacy Override. In that event, the other
TOSHIBA
IPedge
Feature Operations
59