Audio Settings; Volume; Ring Tones - Alcatel TEMPORIS IP 200 Administrator's Manual

Audio Settings

Volume

Handset, speaker, headset and ringer volumes can be adjusted independently.
To adjust the volume in idle mode:
Press ->3.Settings->1.Basic.
Scroll to 4.Phone Volume, and press OK button. Select the item you wish to adjust
and use and
volume.
Press OK button to save volume change or MENU key to cancel.
To adjust ring volume you can also press
To adjust the volume when you are in an active call:
When Handset/Headset/Hands-free mode is activated, press
the volume.
Note:
The volume can only be adjusted via Phone interface.

Ring Tones

You can select the type of the ring tone.
To select Ring Tone Type via Phone interface:
Press ->3.Settings->1.Basic->OK.
Scroll to 3.Ring Tone, and press OK button.
Use the up and down navigation keys to highlight your selection. The tone will be
played.
Temporis IP 200 Administrator Guide
or left and right navigation keys to increase or decrease
and
ed 1.0
when the phone is in idle status.
or to adjust
- 26 - / 109