Reset To Factory - Alcatel TEMPORIS IP 200 Administrator's Manual

3) You are prompted to confirm your request. Press OK to confirm, press Cancel to
cancel the operation.
Note:
Please do not power off during reboot, or it will cause the flash memory error.

Reset to Factory

You should reset the phone only in this case: the phone configuration was changed and
the phone is not functioning anymore. To maintain the configuration of the phone, you
need your system administrator or service provider's advice.
To reset to factory via phone interface:
1) Make sure active User Type is admin or var
2) Press ->3.Settings->2.Advanced.
3) You are prompted to enter the required password.
4) Scroll to Reset Factory option, then press OK button.
5) You are prompted to confirm the change, press OK to reset to factory settings, or
MENU to return to previous menu.
It will take a few minutes to reset, please do not power off during resetting, or it will
cause flash memory error.
To reset to factory via Web interface:
Choose Upgrade->Basic.
Click Reset button.
You are prompted to confirm the change, press OK to confirm the changes, press
Cancel to cancel the operation.
Note:
If you press Confirm all current settings including contact list, call history, account
settings, etc will be lost. You need to export the configuration first if you still want to
import the old configurations after reset.
Otherwise your phone will have to be configured manually unless mass provisioning is
used
Temporis IP 200 Administrator Guide ed 1.0 - 82 - / 109