Download Print this page

Alcatel Temporis IP 600 Administrator's Manual

Sip ip phone
Hide thumbs

Advertisement

Temporis IP 600 is a performing and easy-to-use SIP IP phone conceived for the
business
environment.
interoperability with IPPBX and VoIP providers, HD sound to grant a better efficiency in
business communication or remote phonebook and xml browser to enhance integration
within your company system and customize user interface make it the ideal terminal
for your business.
Please read carefully the administrator guide for a better knowledge of available
functialities and configurations possibilities you have access to with this terminal and
thus be granted with an entire satisfaction.
Declaration of Conformity
Hereby, it's declared that this phone is in conformity with the essential
requirements and other relevant provisions of the CE, FCC.
CE Mark Warning
This is a class B device, in a domestic environment; this product may cause radio
interference, in which case the user may be required to take adequate measures.
WEEE Warning
Temporis IP 600
ADMINISTRATOR'S GUIDE
Features
such
as
an
intuitive
user
interface,
wide

Advertisement

loading

  Also See for Alcatel Temporis IP 600

  Summary of Contents for Alcatel Temporis IP 600

  • Page 1 Temporis IP 600 ADMINISTRATOR’S GUIDE Temporis IP 600 is a performing and easy-to-use SIP IP phone conceived for the business environment. Features such intuitive user interface, wide interoperability with IPPBX and VoIP providers, HD sound to grant a better efficiency in...
  • Page 2 To avoid the potential effects on the environment and human health as a result of the presence of hazardous substances in electrical and electronic equipment, end users of electrical and electronic equipment should understand the meaning of the crossed-out wheeled bin symbol. Do not dispose of WEEE as unsorted municipal waste and have to collect such WEEE separately.
  • Page 3: Table Of Contents

    Contents Getting Started ..........- 1 - Packing List................... - 1 - Assembling the Phone ................- 1 - Configuration and Registration ..............- 3 - Basic Configuration via Web Page ............- 3 - Basic Configuration using phone keypad ..........- 5 - Overview ............
  • Page 4 Import/Export Contact List .............. - 33 - Remote Phone Book ............... - 34 - Broadsoft ..................- 35 - LDAP .................... - 36 - Basic Call Functions ........- 38 - Outgoing calls ..................- 38 - Call Devices ................... - 38 - Call Methods ..................
  • Page 5 Call Transfer .................. - 64 - 3-way Conference ................- 65 - Network Conference ............... - 65 - HuaWei ATS Conference ..............- 66 - Voicemail ..................- 68 - SMS ..................... - 70 - Advanced Functions ........- 73 - Account Setting ...................
  • Page 6 Appendix A........... - 110 - Line Key configuration menu ..............- 110 - Memory Key configuration menu ............- 113 -...
  • Page 7: Getting Started

    This section introduces how to assemble the phone with the components in the packing list Attach the foot stand or wall mount accessories; Connect Handset; Connect Network and Power. Attach the Stand or wall mount accessories, as shown below: Temporis IP 600 Administrator guide version 0.1 - 1 -...
  • Page 8 You can either connect the phone to the AC Power directly using a power adapter (not supplied) or to a PoE compliant switch or hub. Your system administrator will advise you on which one to use. Temporis IP 600 Administrator guide version 0.1 - 2 -...
  • Page 9: Configuration And Registration

    Temporis IP600 features an embedded web server to help administrators and users configure, manage and use their phone in an intuitive and simple manner. The phone’s web server can be accessed with any web browser. Temporis IP 600 Administrator guide version 0.1 - 3 -...
  • Page 10 The name showing on the LCD of current device. Display Name The local phone name showing on the other phone when calling. Register Name Register name provided by ISP. User Name User account information, provided by ISP. Temporis IP 600 Administrator guide version 0.1 - 4 -...
  • Page 11: Basic Configuration Using Phone Keypad

    Then press the down key to be prompted for the password. It is “admin” by default and press OK. Network Settings: Press MENU->3.Settings->2.Advanced->OK. Enter the admin password, choose Network->WAN Port/PC Port /VLAN/Webserver Type/802.1x Settings to enter the internet relating configuration page Temporis IP 600 Administrator guide version 0.1 - 5 -...
  • Page 12 User Type menu, like this: <*user > Once you finish all admin related tasks you should go back to user mode with the same procedure, or simply reboot the phone. Temporis IP 600 Administrator guide version 0.1 - 6 -...
  • Page 13: Overview

    The account is active Blinking green There is an incoming call to the account, or there is a call on hold status The phone is in idle status whatever registered/ unregistered Temporis IP 600 Administrator guide version 0.1 - 7 -...
  • Page 14: Icons

    It is not active as BLA Icons Temporis IP600 displays different kinds of icons on its LCD, you can refer to the following table for their meanings: Temporis IP 600 Administrator guide version 0.1 - 8 -...
  • Page 15 In speaker mode The recording session cannot be started The recording cannot be stopped. Probably the recording box is full. This call cannot be recorded. The recording session has successfully started. Temporis IP 600 Administrator guide version 0.1 - 9 -...
  • Page 16: User Interface

    --Call Forward √ --Call Waiting √ --Function Keys √ -- Send Key √ --Hot Line √ --Anonymous Call √ √ --Auto Redial √ --Dial Plan --Tones --DND Codes √ --ReDialTone --Emergency Temporis IP 600 Administrator guide version 0.1 - 10 -...
  • Page 17 --Reset to factory √ --Set password Update √ --Set AES Key √ --Keypad Lock √ --Auto Provision Other Features --Messages √ --History Type √ √ --Directory √ --User Mode √ Temporis IP 600 Administrator guide version 0.1 - 11 -...
  • Page 18 Some functions are password protected. In this case when you are prompted for a password make sure to introduce one in accordance with active User Type. The default administrator password is admin. Temporis IP 600 Administrator guide version 0.1 - 12 -...
  • Page 19: Customizing Your Phone

    View the Phone Status via Web interface: Open a web browser and input the IP Address of the phone. Enter login and password (default login and password are both “admin”). Status page will be shown directly. Temporis IP 600 Administrator guide version 0.1 - 13 -...
  • Page 20: Language

    Scroll through the list of available languages. Press the Save soft key or OK button when the desired language is highlighted. Press Back soft key to return to the previous screen. Temporis IP 600 Administrator guide version 0.1 - 14 -...
  • Page 21: Time And Date

    Press Save soft key to save your changes. Press Back soft key to return to the previous screen. To set the time format via the Phone interface: Press Menu->3.Settings->1.Basic ->2.Time & Date->3. Format. Temporis IP 600 Administrator guide version 0.1 - 15 -...
  • Page 22 Please refer to the instruction above for parameters’ detail. To change the Daylight Saving Time settings via the Phone interface: Press Menu->3.Settings->1.Basic ->2.Time & Date->1.SNTP ->4.Daylight Saving. Temporis IP 600 Administrator guide version 0.1 - 16 -...
  • Page 23 This table is named AutoDST.xml and can be changed via provisioning Note: By default the time zone is +1 France (Paris), Daylight Saving Time is Automatic. Temporis IP 600 Administrator guide version 0.1 - 17 -...
  • Page 24: Push Xml

    Click the confirm button to save the change. Maximum number of Calls In some situations service providers want to limit the number of calls a subscriber is able to send or receive. Temporis IP 600 Administrator guide version 0.1 - 18 -...
  • Page 25: Keypad Lock

    The icon will be displayed on the top right corner of the idle screen. If you choose Lock&Answer, the icons will be displayed. To unlock the phone via Phone interface: Temporis IP 600 Administrator guide version 0.1 - 19 -...
  • Page 26 You can use any of the programmable keys to provide a shortcut to Keypad Lock. Choose Phone->Function Keys->select a programmable key and in the scrolling menu select Keypad lock. In idle mode, when pressing this key, you’re prompted to enter the password and then Temporis IP 600 Administrator guide version 0.1 - 20 -...
  • Page 27: Logo Customization

    .dob. Please ask your customer support for details. Using Web interface: Choose Phone-> Features-> Use Logo->Custom Logo, press Browse button, and select the corresponding file. Press Upload button to complete the Logo Customization. Temporis IP 600 Administrator guide version 0.1 - 21 -...
  • Page 28: Audio Settings

    0, or press the Silence soft key when there is an incoming call, the following icon displayed on the LCD. Press the Volume keys to adjust the volume, and this icon will disappear. Temporis IP 600 Administrator guide version 0.1 - 22 -...
  • Page 29: Ring Tones

    Choose Phone->Preference->Ring Type. Highlight your selection in the scroll-down menu and click confirm button to update the change. You can also delete a ring tone by clicking the Delete button. Temporis IP 600 Administrator guide version 0.1 - 23 -...
  • Page 30 To specify ring tones for a specific account via Web interface: Choose Account->Basic->Ring Type option, and highlight the preferred one for the chosen account in the scroll-down menu, then click confirm button to save the changes. Temporis IP 600 Administrator guide version 0.1 - 24 -...
  • Page 31: Codec Selection

    Codec Selection can only be done via Web interface. Tone Settings Your Temporis IP600 allows you to configure how the following tones used for subscriber signaling will sound like: Dial Ring Back Temporis IP 600 Administrator guide version 0.1 - 25 -...
  • Page 32: Voice

    This section allows you to configure some parameters related with Voice management using the Web interface. 1 Go to Phone->Voice. 2 Set the following parameters: Parameter Description Echo canceller Defines whether to enable the echo canceller. Temporis IP 600 Administrator guide version 0.1 - 26 -...
  • Page 33: Distinctive Ringing

    Up to 10 distinctive ring tones can be set by configuring “Internal ringer text”. This field will have to be filled in with the expected content of the Alert-info header in the received “INVITE”. To edit the Ring option via Web interface: Temporis IP 600 Administrator guide version 0.1 - 27 -...
  • Page 34: Contact Management

    Users can also give access to a remote phonebook and Broadsoft phonebook (depending of your company server) With the local directory you can: - add, - edit, - delete, Temporis IP 600 Administrator guide version 0.1 - 28 -...
  • Page 35 Press Menu soft key->2. Features->3.Function Keys->2.Memory Keys Use the up and down navigation keys to select the key on which you want to store the contact and confirm with OK key. Temporis IP 600 Administrator guide version 0.1 - 29 -...
  • Page 36 Press OK key to confirm the operation, or press the Cancel soft key to return to the directory. To move a contact to the Blacklist via Phone interface: Press Dir soft key->1.Local Directory Choose Contacts or a group, and press the OK key. Temporis IP 600 Administrator guide version 0.1 - 30 -...
  • Page 37 Press Logs soft key to enter the call history list. Use the navigation keys to highlight a record, and then press the Option soft key and select Add to Contacts, then press the OK key. Temporis IP 600 Administrator guide version 0.1 - 31 -...
  • Page 38 Press Search soft key, type the 1 letter of your contact name and press the OK key. Contact list will search for matching records. To add/delete/edit/move contacts via Web interface: Choose Contacts->Local Phone Book. Temporis IP 600 Administrator guide version 0.1 - 32 -...
  • Page 39: Import/Export Contact List

    To move a contact to blacklist: select the contact in the list and press Move To blacklist button. Import/Export Contact List Import/Export Contact List via Web interface: Go to Contacts-> Local Phone Book. Temporis IP 600 Administrator guide version 0.1 - 33 -...
  • Page 40: Remote Phone Book

    Remote Phone Book In addition to Temporis IP 600 local phone book, you can access to the company remote phonebook (if any). To set the Remote Phone Book via Web interface: Go to Contacts->Remote Phone Book.
  • Page 41: Broadsoft

    3. Ask your technical support for more detailed information. Broadsoft This feature will only be functional in Broadsoft environments. Broadsoft phonebook can be set the same way as for the Remote Phonebook. Temporis IP 600 Administrator guide version 0.1 - 35 -...
  • Page 42: Ldap

    1. Search a contact: press the key which is set up as LDAP, input a number or letter, Temporis IP 600 searches the contact in LDAP server. 2. Search an incoming call: when there is an incoming call, Temporis IP600 searches in its local directory if it matches with a stored contact.
  • Page 43 Note: ask your technical support for more details. Temporis IP 600 Administrator guide version 0.1 - 37 -...
  • Page 44: Basic Call Functions

    Press an available line button and dial the number you want to call, Dial a number and select the audio device (remember that if you have chosen headset, you will have to press OK key), Temporis IP 600 Administrator guide version 0.1 - 38 -...
  • Page 45 Choose Contact->Phone Call Info, enter the phone number to dial out in the “Dial a Number” section, if necessary select the line from which you want to place the call and Temporis IP 600 Administrator guide version 0.1 - 39 -...
  • Page 46 To terminate a call: Press the Cancel soft key or If you are in handset mode, replace the handset on the base If you are in handsfree mode, press Temporis IP 600 Administrator guide version 0.1 - 40 -...
  • Page 47: Live Dialpad

    This function can only be set via Web interface with admin/var rights: Go to Phone->Preference->Live Dialpad. Enable or disable it in the pull-down menu. Click Confirm button to save the change. Temporis IP 600 Administrator guide version 0.1 - 41 -...
  • Page 48: Send Key Configuration

    To set send key via the Web interface: Choose Phone-> Features-> Send Key. Highlight the specific one in the pull-down menu, then click the Confirm button to save the change or Cancel button to discard. Temporis IP 600 Administrator guide version 0.1 - 42 -...
  • Page 49: Password Dial

    Choose phone->features->PswDial, in the pull-down menu, choose enable. Enter the password prefix in the PswPrefix field Enter the Length in the PswLength field. Click the confirm button to save the changes. Temporis IP 600 Administrator guide version 0.1 - 43 -...
  • Page 50: Call Completion

    Make sure the active User Type is admin or var. If not, please change user mode as explained in “Configuration and Registration” chapter. Press Menu soft key->2.Features ->10.Call Completion press OK key to enter the configuration page. Use Switch soft key to enable this option. Temporis IP 600 Administrator guide version 0.1 - 44 -...
  • Page 51: Auto Redial

    To set auto redial via Web interface: Choose Phone->Features->Auto Redial. Choose Enabled or Disabled in the pull-down menu, click confirm button to save the change or Cancel butto to discard. Temporis IP 600 Administrator guide version 0.1 - 45 -...
  • Page 52: Hot Line

    Enter the hot line number and press navigation keys to select Hot Line Delay. Set the Hot Line Delay (default is 4 seconds), then press the OK key to save the changes. To set the Hot Line via the Web interface: Temporis IP 600 Administrator guide version 0.1 - 46 -...
  • Page 53: Anonymous Call

    These services can be managed through both phone and Web interfaces. To set the anonymous call via phone interface: Press Menu soft key->2.Features-> 6.Anonymous Call ->Press OK to enter the configuration page. Temporis IP 600 Administrator guide version 0.1 - 47 -...
  • Page 54 Anonymous Call Rejection is only available for the current default account. Press the OK key to save the changes. To set the anonymous call service via Web interface: Choose Account-> Basic-> Anonymous Call. Perform necessary changes. Please refer Temporis IP 600 Administrator guide version 0.1 - 48 -...
  • Page 55: Dial Plan

    Dial plans can be used for least cost routing, dialing convenience or to prevent users from calling specific numbers or groups of numbers. Temporis IP 600 supports various types of elements related to dial plan: replace rules, dial now entries, area code management and forbidden numbers. All of them require Temporis IP 600 Administrator guide version 0.1...
  • Page 56: Replace Rule

    Stands for a string of char, and “x” stands for any single char. Additionally Prefix content in () will be considered as a variable. In the Replace field, the first variable is expressed by $1, the second variable is Temporis IP 600 Administrator guide version 0.1 - 50 -...
  • Page 57: Dial Now

    You can also delete a selected entry from the Dial Now list by pressing Del button. Note: A timeout will be waited for before actually sending dialed digits matching the pattern. Temporis IP 600 Administrator guide version 0.1 - 51 -...
  • Page 58: Area Code

    Enter the specific digit pattern, and click Add button to save the changes, or choose a specific entry in the list, click Del button to delete the record. You can select a record to modify it, then click Edit button to submit. Temporis IP 600 Administrator guide version 0.1 - 52 -...
  • Page 59: Incoming Calls

    “Answer” softkey. During the conversation, you can alternate between Headset, Handset and Speaker phone by pressing the corresponding buttons or picking up the handset. Temporis IP 600 Administrator guide version 0.1 - 53 -...
  • Page 60: Rejecting An Incoming Call

    To configure Call Forward via Phone interface: Press Menu soft key->2.Features->1.Call Forward->press OK key. You can also press down navigation key in idle mode to enable/disable call forward. Temporis IP 600 Administrator guide version 0.1 - 54 -...
  • Page 61 When call forward is locally enabled (not through codes), the corresponding icon will be displayed on the phone screen. To configure Call Forward via Web interface: Choose Phone->Features->Call Forward to do necessary changes. Please refer to the above configuration information. Temporis IP 600 Administrator guide version 0.1 - 55 -...
  • Page 62: Dnd/Fwd Synchronisation

    To set Feature Key Synchronisation via the Web interface: Choose Phone->Features-> Feature Key Synchronisation Choose whether to enable this function from the pull-down menu. Click the Confirm button to save the change or Cancel to discard. Temporis IP 600 Administrator guide version 0.1 - 56 -...
  • Page 63: Intercom

    Your set can be configured to accept different levels of Intercom, either through phone or Web interfaces. To configure Intercom option via phone interface: Press Menu->2.Features->9.Intercom->OK to enter the configuration page. Press down navigation key to display: Temporis IP 600 Administrator guide version 0.1 - 57 -...
  • Page 64: Auto Answer

    Use the navigation keys to select Auto Answer option and press the Switch soft key to enable or disable the auto answer function. The default setting is Disable. Press the OK key to save the changes. Temporis IP 600 Administrator guide version 0.1 - 58 -...
  • Page 65: Call Log

    Choose Enabled or Disabled in the pull-down menu, click confirm button to save the change. Call log Temporis IP 600 can store up to 100 calls in its Call log. There are 5 different lists: All calls Forwarded calls Missed calls Temporis IP 600 Administrator guide version 0.1...
  • Page 66: Accessing Call Log

    Dial current entry by pressing Send soft key, or Store it in Directory or Black list by pressing Option soft key (see Contacts Management chapter for details), or Delete it using key or Delete soft key. Temporis IP 600 Administrator guide version 0.1 - 60 -...
  • Page 67: Missed Call Log Enable/Disable

    It can be defined whether issued calls will be saved in the call history record or not. This function can only be set via the Web interface: Choose Account->Basic->Missed call log. Choose Enabled or Disabled in the pull-down menu, click confirm button to save the change. Temporis IP 600 Administrator guide version 0.1 - 61 -...
  • Page 68: During An Active Call

    Handling a waiting call By default Call Waiting is enabled, and when an incoming call is received during another active call a warning tone will be played periodically. Temporis IP 600 Administrator guide version 0.1 - 62 -...
  • Page 69: Call Waiting Configuration

    Press OK key to save the changes, or Back soft key to return to the previous menu. To enable/disable Call Waiting via Web interface: Choose Phone->Features->Call Waiting perform necessary changes. Temporis IP 600 Administrator guide version 0.1 - 63 -...
  • Page 70: Call Transfer

    During an active call press Tran soft key, the call is put on hold. Dial the second phone number, while it is ringing, hang up or press Tran soft key to complete the transfer. Note: Temporis IP 600 Administrator guide version 0.1 - 64 -...
  • Page 71: 3-Way Conference

    To enable network conference via web interface: Choose Account->Account X->Advanced->Conference Type, there is a pull-down menu, choose network from the list. Enter the Conference URI. Press Confirm button to save the changes. Temporis IP 600 Administrator guide version 0.1 - 65 -...
  • Page 72: Huawei Ats Conference

    This function needs specific server support. To enable ATS conference via web interface: Choose Account->Account X->Advanced->Conference Type, there is a pull-down menu, choose ATS from the list. Temporis IP 600 Administrator guide version 0.1 - 66 -...
  • Page 73 PriChart soft key. Initiator can use remove function to remove any conference members, press Remove soft key, choose any members in phone member list , and then press Remove soft key Temporis IP 600 Administrator guide version 0.1 - 67 -...
  • Page 74: Voicemail

    To configure Voicemail settings using the Web interface: Go to Account->Basic and set Voicemail number If needed go to Account->Advanced-> and set Subscribe for MWI and MWI Subscription period. Temporis IP 600 Administrator guide version 0.1 - 68 -...
  • Page 75: Retrieving Your Voicemail Messages

    Your voice mailbox is called and you are able to listen to your new and old messages. Note: 1. Before retrieving the new voicemail, please make sure that the connecting code has been set on the phone. Temporis IP 600 Administrator guide version 0.1 - 69 -...
  • Page 76: Sms

    Messages appear from first to last in sent order. Press Send soft key, you are required to choose an account from which you want to Temporis IP 600 Administrator guide version 0.1 - 70 -...
  • Page 77 Enter the account information: target phone number, message content. Press Send button to send out the message, or Cancel button to cancel the operation. Note: Using Web interface you can only send messages. Temporis IP 600 Administrator guide version 0.1 - 71 -...
  • Page 78 Temporis IP 600 Administrator guide version 0.1 - 72 -...
  • Page 79: Advanced Functions

    This parameter could set the period of the subscription. The default value is 3600. Period(seconds) DTMF Type Select the DTMF type. You can only configure these settings via Web interface. Choose Account. Temporis IP 600 Administrator guide version 0.1 - 73 -...
  • Page 80: Tls

    TLS option, and then click the Confirm button to save the change. DNS-SRV DNS-SRV option allows the SIP phone to discover what are the available servers (IP and Transport and priority) for the specified SIP server domain. Temporis IP 600 Administrator guide version 0.1 - 74 -...
  • Page 81: Network Setting

    Admin can configure phone PC port IP address. Enable DHCP If you set the DHCP server on, the device connected to the PC port will get the IP address automatically between the start IP address Temporis IP 600 Administrator guide version 0.1 - 75 -...
  • Page 82: Advanced Network Settings

    Choose Network->Advanced->LLDP->Active option. In the pull-down menu, choose enable. Then enter the corresponding Packet Interval in Packet Interval field. You can also disable this function when you choose disable in active field. Temporis IP 600 Administrator guide version 0.1 - 76 -...
  • Page 83 To configure VLAN settings via Phone interface: Press Menu soft key->3.Settings->2.Advanced. Enter the password required, scroll to Network option, then press OK key, select VLAN and press OK key. Choose WAN Port, press OK key. Temporis IP 600 Administrator guide version 0.1 - 77 -...
  • Page 84 Temporis IP600 supports HTTPS (Hypertext Transfer Protocol over Secure Socket Layer). Adding SSL layer under HTTP, in short, adds a security layer to HTTP. Admins can set this transmission mode via web page. Temporis IP 600 Administrator guide version 0.1 - 78 -...
  • Page 85 IEEE 802.1X is an IEEE Standard for port-based Network Access Control (PNAC). It is part of the IEEE 802.1 group of networking protocols. It provides an authentication mechanism to devices wishing to attach to a LAN, either establishing a point-to-point Temporis IP 600 Administrator guide version 0.1 - 79 -...
  • Page 86: Other Settings

    Set the TOS field value to indicate the network desired priority for voice and signaling packets Local RTP Port Define the port range for voice transmission. WebServer Users can choose WebServer type: Disable, HTTP, HTTPS, or HTTPS & HTTP. Temporis IP 600 Administrator guide version 0.1 - 80 -...
  • Page 87: Maintenance Tasks

    Confirm button to save the changes, or Cancel button to cancel the changes. To logout via Web interface: Click the Logout button at the top right corner. Reboot You should reboot the phone when you are asked to, e.g. after applying specific Temporis IP 600 Administrator guide version 0.1 - 81 -...
  • Page 88: Reset To Factory

    The reset to factory option must done in the admin mode. To reset to factory via Web interface: Choose Upgrade->Basic. Click Reset button. You are prompted to confirm the change, press OK to confirm the changes, press Temporis IP 600 Administrator guide version 0.1 - 82 -...
  • Page 89: Configuration Export/Import

    When the function is disabled, the phone will not reboot. Configure watchdog via web interface Choose phone-> Preference->WatchDog, in the pull-down menu, choose enable or disable this function. Temporis IP 600 Administrator guide version 0.1 - 83 -...
  • Page 90: Action Url/Uri

    The events that can be recorded include: Setup Completed, Log On, Log Off, Register Failed, Off hook, On hook…etc. Set Action URL via web interface Choose Phone->action URL Enter the Corresponding contents Click Confirm to save the changes. Temporis IP 600 Administrator guide version 0.1 - 84 -...
  • Page 91 Temporis IP 600 Administrator guide version 0.1 - 85 -...
  • Page 92: Firmware Update And Autoprovisioning

    Note: Any power interruption during the subsequent process will most likely lead to a flash memory error. As a result the system cannot boot up anymore. The procedure can be Temporis IP 600 Administrator guide version 0.1 - 86 -...
  • Page 93: Decryption

    Key. The parameters to fill in depend on the files you’re using for provisioning. Contact your service provider or check with your technical support. Then click the Confirm button as shown below: Note: Temporis IP 600 Administrator guide version 0.1 - 87 -...
  • Page 94: Zero-Active Interface

    Zero-Active interface. Turn on Zero-Active via web interface: Choose Upgrade->Advanced-> Zero Active, in the pull-down menu, choose enable to turn on this function. Click Confirm to save. Temporis IP 600 Administrator guide version 0.1 - 88 -...
  • Page 95: System Log Export

    If some errors happen in your phone, you can export the system log and send it to your system administrator for diagnosis. To export the System Log via Web Interface: Choose Upgrade->Advanced, select Export System Log type, if the type is Local, it will Temporis IP 600 Administrator guide version 0.1 - 89 -...
  • Page 96: Pcap Trace Export

    Highlight the desired one in the Unselect Softkeys/Select Softkeys list, and press the to move to the other list. And you can use to choose the order how to display in the call states. Temporis IP 600 Administrator guide version 0.1 - 90 -...
  • Page 97: Programmable Keys

    (The programmable keys are only available when the phone is in idle mode). Default configuration for idle mode is: Up key: access to redial list Down key: access to call forward Temporis IP 600 Administrator guide version 0.1 - 91 -...
  • Page 98: Line Keys Configuration

    The phone has 3 line keys which are able to set up to 35 functions per key. The following list shows the functions you can set on the line keys. The next paragraphs provide a description for each function. The default configuration for each key is Line. Temporis IP 600 Administrator guide version 0.1 - 92 -...
  • Page 99 Voice Mail Speed Dial Intercom Line Group Listening Public Hold Private Hold Shared Line XML PhoneBook Group Pickup Paging Record Xml Browser Hot Desking URL Record LDAP BLF List Prefix Zero-Active Temporis IP 600 Administrator guide version 0.1 - 93 -...
  • Page 100 In the pull-down menu select Forward from the list. Enter the extension number you want to forward to in the Extension field. Press Confirm button to save the changes. Temporis IP 600 Administrator guide version 0.1 - 94 -...
  • Page 101 From the pull-down menu in the Type field, select DND from the list. Press Confirm button to save the changes. Redial If a key is configured as Redial key: Temporis IP 600 Administrator guide version 0.1 - 95 -...
  • Page 102: Call Return

    IP PBX provider for more details. To assign the key as Pick Up: Choose Phone-> Function Keys -> Line Key, choose one of the keys on which you want Temporis IP 600 Administrator guide version 0.1 - 96 -...
  • Page 103: Call Park

    In the “Value” field, enter the specific number. Press Confirm button to save the changes. Voice Mail When the key is configured as Voicemail key you are allowed to access voicemail quickly by pressing this key. Temporis IP 600 Administrator guide version 0.1 - 97 -...
  • Page 104: Speed Dial

    Your VoIP PBX must support this feature. And make sure the Intercom Allow is enabled. Line The most frequent usage for line keys is assigning them one of the two possible user accounts for call management. To assign the key as Line: Temporis IP 600 Administrator guide version 0.1 - 98 -...
  • Page 105 From the pull-down menu in the Type field, select URL from the list. Enter the number you want to set as URL in the Value field. Press Confirm button to save the changes. Temporis IP 600 Administrator guide version 0.1 - 99 -...
  • Page 106: Group Listening

    Choose Phone-> Function Keys ->Line Key, choose one of the keys on which you want to make the assignment. From the pull-down menu in the Type field, select Private Hold from the list. Press Confirm button to save the changes. Temporis IP 600 Administrator guide version 0.1 - 100 -...
  • Page 107: Shared Line

    Choose Phone-> Function Keys -> Line Key, choose one of the keys on which you want to make the assignment. From the pull-down menu in the Type field, select Group Pick Up option from the list. Temporis IP 600 Administrator guide version 0.1 - 101 -...
  • Page 108: Xml Browser

    Using xml browser, customers can customize their Temporis IP 600 Administrator guide version 0.1 - 102 -...
  • Page 109: Hot Desking

    When you are in conversation, press function key to start the recording process of the current call. Press the function key again to disable the recording function Temporis IP 600 Administrator guide version 0.1 - 103 -...
  • Page 110: Blf List

    Choose Account->Advanced-> BLF List URI, enter the BLF List URI. Then enter the BLF List Code in the BLF List Code field. Click the Confirm button to save. To assign the key as BLF List: Temporis IP 600 Administrator guide version 0.1 - 104 -...
  • Page 111 Please check with your service provider or PBX vendor for details. To use ACD: Press line Key. A login box will pop up. Enter the User ID and Password and click OK Temporis IP 600 Administrator guide version 0.1 - 105 -...
  • Page 112: Local Phonebook

    The line keys can be configured as Broadsoft Group. By pressing this key in idle status, you can enter the Broadsoft Group interface. To assign the key as Broadsoft Group: Choose Phone-> Function Keys ->Line Key, choose one of the keys on which you want Temporis IP 600 Administrator guide version 0.1 - 106 -...
  • Page 113 Group from the list. In the Line field, choose a broadsoft Group to specify the record, so you must configure the Broadsoft Group at first. Press Confirm button to save the changes. Temporis IP 600 Administrator guide version 0.1 - 107 -...
  • Page 114: Trouble Shooting

    How to change the time? Select the time zone or enter the time information manually on the webpage or the phone. How to answer the incoming calls during a call? Temporis IP 600 Administrator guide version 0.1 - 108 -...
  • Page 115 Make sure the firmware you choose is provided by your service provider, or the device will probably crash after the update. How to auto provision? Consult the auto provision server address with your ISP. Temporis IP 600 Administrator guide version 0.1 - 109 -...
  • Page 116 2.Accoun 2.Accoun 2.XML t ID t ID t ID t ID t ID t ID Browse      3.User 3.Value 3.Value 3.Value 3.Value (R/O)  4.Server 4.Extensio Temporis IP 600 Administrator guide version 0.1 - 110 -...
  • Page 117 Group Zero-SP-To type: Call Park Voicemai Listening Prefix Pickup DTMF      3.Accoun 3.Accou 3.Value 3.Accou 3.Value    4.Value 4.Value 4.Value Temporis IP 600 Administrator guide version 0.1 - 111 -...
  • Page 118     3.Account 3.Account 3.Value 3.Contacts   4.Value 4.Value type: type: type: 2.Key type: 2.Key type:     Tran Hold Redial   3.Value 3.Value Temporis IP 600 Administrator guide version 0.1 - 112 -...
  • Page 119 Speed dial Intercom Key Event    2.Account 2.Account 2.Key type: 2.Key type: Paging 2.Key type: Redial   Call Return    3.Value 3.Value 3.Account  4.Value Temporis IP 600 Administrator guide version 0.1 - 113 -...
  • Page 120 ALCATEL, TEMPORIS and ATLINKS are registered trademarks. The Alcatel logo and Alcatel name are trademarks of Alcatel and used under license by ATLINKS. You can download the latest administrator guide from our website: http://www.atlinks.com...