Find The Phone Ip Address; Reset To Factory Settings; Registering Phone; Manual Configuration - Alcatel IP2015 Configuration Manual

Find the phone IP address

Find out your Alcatel phone IP Address.
Press ♫ button on the handset.
The IP address will be displayed on the top of display.

Reset to factory settings

This step is not required for brand new out-of-the-box phones, however, if the phone has been
already used then it is a must.
Open a new browser window and enter your phone IP address in order to access the phone
web administration interface login screen. Example: http://192.168.1.22.
Login to phone web administration interface with your username and password. Please note,
factory default login details are username: admin and password: admin.
Click on Servicing tab.
Click Provisioning in the left navigation menu.
Click Reset button at the bottom of the page. Phone will be reset to the factory settings and
reboot.
Wait sometime prior for device to reboot.
NOTE:
Do not unplug or remove power to the phone while it is updating firmware and
configurations.

Registering phone

This chapter describes how to identify Alcatel phone model, requirements that must be met and
how to register the phone using manual configuration or auto provisioning.
The following topics are covered:

Manual configuration

Auto provisioning
Manual configuration
This chapter describes how to set UAD settings, create PBXware extension and register the
phone.
The following topics are covered:
UAD settings
Creating extension
Registering phone