Alcatel TEMPORIS IP 200 Administrator's Manual page 97

if you press this key the phone will blind transfer to that number. If you leave it
blank the key will behave as transfer hard key.
3) Press Confirm button to save the changes.
Hold
The key can be configured as a hold key. You can use this key to hold and retrieve a call
during the conversation.
To assign the key as Hold via web interface:
Choose Phone-> Function Keys -> Line Key, choose one of the keys on which you want
to make the assignment, there is a pull-down menu in the Type field, choose Hold from
the list.
Press Confirm button to save the changes.
DND
If the key is configured as DND key, it will work as a toggle key to enable/disable this
service.
Please check DND chapter in the Incoming calls section of Basic Call Functions chapter
for more information about this function.
To assign DND to a key via web interface:
1) Choose Phone-> Function Keys -> Line Key, choose one of the keys on which you
want to make the assignment. From the pull-down menu in the Type field select
DND.
2) Press Confirm button to save the changes.
Redial
If a key is configured as Redial key:
•
If you press this key in idle status, it will enter the Dialed Calls interface
•
If you press this key in off hook mode, last dialed number will be sent directly
•
If you press this key when there is an active call, it will be put on hold and a new
call sent to the last dialed number
To assign Redial to a key via web interface:
1) Choose Phone-> Function Keys -> Line Key. Choose one of the keys on which you
want to make the assignment. From the pull-down menu in the Type field select
Temporis IP 200 Administrator Guide ed 1.0 - 97 - / 109