Call Hold; Call Waiting; Handling A Waiting Call; Call Waiting Configuration - Alcatel TEMPORIS IP 200 Administrator's Manual

unmute the call. When you press

Call Hold

This call function allows you to place an active call on hold. In this case your IP PBX
might play a melody or message to the other party while waiting. Other calls can be
received and made while having a call on hold.
To hold/resume a call:
Press button to put your active call on hold.
During the call, there will be a warning tone every 30 seconds, suggesting that there is
a current call in hold state.
If there is only one call on hold, press
If there is more than one call on hold, press the Up/Down navigation keys to select the
desired call, then press
Note:
When you are under the call hold status, putting down the handset, the conversation
will go on over the speaker instead of hanging up the call.

Call Waiting

This call feature allows your phone to accept other incoming calls when there are other
active calls.

Handling a waiting call

By default Call Waiting is enabled, and when an incoming call is received during another
active call a warning tone will be played periodically.
In this situation, user can:
1) Accept the second call using the OK key. The first one will be put on hold
automatically. Or
2) Reject the call using

Call Waiting Configuration

Temporis IP 200 Administrator Guide
button all of the conversations will be muted.
button again to retrieve the call.
button again to retrieve the call.
button
ed 1.0 - 65 - / 109