Time And Date - Alcatel TEMPORIS IP 200 Administrator's Manual

Time and Date

Time and date are displayed on Temporis IP200 idle screen. By default the phone will
try to obtain them from a preconfigured SNTP server, but you can set them manually if
needed. Please contact your system administrator if the time or date are incorrect.
To change Time and Date via the Phone interface:
Press ->3.Settings->1.Basic->2.Time & Date->OK.
If SNTP is chosen, the phone will automatically get the time from an NTP Server. Use
the up and down navigation keys to highlight the specific options and change
parameters to meet your needs. You can set Time Zone, NTP Server1/Server2, and DST
respectively. By default GMT+1 and automatic DST are configured.
If Manual is chosen, the time can be set manually. Use the up and down navigation keys
to highlight the option and enter the specific date and time.
Press OK button to save your changes. Or press MENU key to return to the previous
screen.
To set time format via the Phone interface:
Press ->3.Settings->1.Basic->2.Time & Date->3.Time & Date->OK.
Use the Left/Right navigation keys to choose a preferred time format: 12 hour or 24
hour.
Press the OK button to save the changes and return to the previous screen.
To change Daylight Saving Time Settings via the Web interface:
1) Go to Choose Phone->Preference->Daylight Saving Time. Select between
Enable/Disable/Automatic
2) If you select Enable , then you will need to set Daylight Saving Time period start
and end dates.
3) If Automatic is chosen dates will be derived from the content of a table saved within
your configuration. This table is named AutoDST.xml and can be changed via
provisioning.
Temporis IP 200 Administrator Guide ed 1.0 - 20 - / 109