Https - Alcatel TEMPORIS IP 200 Administrator's Manual

4) Choose WAN Port and press OK button to enter.
5) Use the left or right navigation keys to choose and set the VLAN Status; input
the VID Number, Priority.
6) Press OK button to save the settings, or MENU to return to VLAN menu.
Follow the same method to set the PC Port option.
To configure VLAN settings via Web interface:
Choose Network->Advanced. Perform necessary changes. Check with your system
administrator for more information.

HTTPS

Temporis IP200 supports HTTPS (Hypertext Transfer Protocol over Secure Socket
Layer). Adding SSL layer under HTTP, in short, adds a security layer to HTTP. Admins
can set this transmission mode via web page.
To configure HTTPS settings via Web interface:
Go to Network->Advanced, choose WebServer option, in the pull-down menu of Type
Temporis IP 200 Administrator Guide ed 1.0 - 78 - / 109