Basic Call Functions; Outgoing Calls; Call Devices; Call Methods - Alcatel TEMPORIS IP 200 Administrator's Manual

Basic Call Functions

Outgoing calls

Call Devices

You can make a phone call via the following devices:
Pick up the handset, icon will be shown on the idle screen.
Press button, icon will be shown on the idle screen.
Press button if the headset is connected to the Headset Port. The icon
will be shown on the idle screen. This is a toggle key. Pressing it again will unselect
headset as audio device.
Note:
1.-You can dial the number first, and then choose the device you will use for your call.
2.-If headset mode is on, you will need to press OK or end of dialing key to launch your
calls

Call Methods

From phone interface:
There are several ways to initiate a call:
Press an available line button and dial the number you want to call, or
Dial a number and select the audio device (remember that if you have chosen headset,
you will have to press OK)
Go to Directory, use the navigation keys to select the desired contact, or
Temporis IP 200 Administrator Guide ed 1.0 - 39 - / 109