Motion Detection - Digisol DG-SC2600 User Manual

2.4.1 Motion Detection

You can use this menu to setup basic motion detection settings:
The settings in this menu are described below:
Item
Enable Motion Select 'Enable' to enable motion detection, and select
Detection 'Disable' to disable this function.
Motion Detection Select the time interval between two motions from
Interval dropdown menu. When a motion is detected, camera will
not detect any motion again within the time interval you
specified here. Available options are from 0 second
(always detect new motion) to 60 seconds.
Recording Time Select the duration you wish this camera to record image
when a motion is detected from dropdown menu.
Available options are 1, 2, 3, 4, and 5 (seconds).
DG-SC2600/DG-SC2600W User Manual
Description
48