Table of Contents
Advertisement
Passive Mode
Click 'Apply' to save settings and make the new settings take effect.
Once configured, click 'Upload a test file' to send a file to the FTP to verify the
functioning of the settings.
2.4.5 SD Card Configuration
You can define the filename and destination folder when saving a file in SD
card.
The settings in this menu are described below:
Item
Enable Cycle
Recording
File Name Prefix
Destination
Folder
Click 'Apply' to save settings and make the new settings take effect.
DG-SC2600/DG-SC2600W User Manual
folder name that can be used to store the images from
the IP Camera. This is required as the folders in the FTP
servers may be secured with access (read/write)
permissions.
Select 'Enable' to use passive mode to send file, or
select 'Disable' not to use passive mode to send file.
Most of the FTP servers can work fine in both Passive
and Non-Passive modes. However, if in doubt, the FTP
Server's administrator should be able to help.
Check this box and this camera will automatically erase
oldest image file to make room for new image files when
SD card is full (By default this box is checked). If you
don't want to loose old image files, do not check this box.
Specify the filename prefix (the texts which will be added
before the file sequence number).
Specify the folder name in which the camera will store
the saved image or video clip.
54
Description
Hide quick links:
Advertisement
Table of Contents
