Digisol DG-SC2600 User Manual page 28

The settings in this menu are described below
Item
Video Type
Frequency
Flip Mode
Brightness /
Saturation /
Sharpness
Volume
NOTE: When you change any setting(s) listed above, please click 'Apply' button so the
change(s) will take effect. For following functions, changes will take effect right away.
Snapshot
DG-SC2600/DG-SC2600W User Manual
:
Specifies video encoding type. Available options
are 'MPEG4', 'MJPEG', and 'H.264'. Different
encoding types require different bandwidth, and
provide different video quality.
If the place where this IP camera points to has
fluorescent light(s), the image may flicker. In this
case, you can adjust this setting to the frequency
of electrical power; which can improve the image
quality effectively. If you don't know which one
you should use, just try any of them and select
the one with fewer flickers.
If the camera is mounted on the ceiling or wall,
you can use this function to rotate the displayed
image.
Select brightness, saturation, and sharpness
from dropdown menu, and click '- ' or '+ 'button to
increase or decrease brightness / saturation /
sharpness setting value. In certain environment,
adjust brightness, saturation, and / or sharpness
will help improve video quality.
Adjust the volume of audio output. Press '+' or '-
'button to increase or decrease volume.
Click 'Snapshot' button to save the displayed image
as an image file, a message box will appear after
you click 'Snapshot' button, showing the filename
and location of saved image file (default filename is
current date and time).
Default directory used to save image file is 'C:\', you
can change the directory by clicking the text input
box located at the right of 'Snapshot' button:
and you'll be prompted to select a new directory.
28
Description