Digisol DG-SC2600 User Manual page 41

WEP Key (1-4)
Self PinCode
Configure via
Push Button
Configure via
PinCode
DG-SC2600/DG-SC2600W User Manual
Input the encryption key of selected wireless access
point here. This is required when an access point you
wish to connect uses encryption.
This is the WPS pin code used to connect to WPS-
enabled wireless access points. You have to input this
number into the WPS enabled access point to establish
WPS connection.
Click this button and this camera will enter PBC-style
WPS connection state for 120 seconds. Please push
'Start PBC' button on the wireless access point you wish
to connect within 120 seconds to establish WPS
connection (The remaining time will be displayed on the
button).
If connection cannot be established after 120 seconds,
you'll be prompted by a message box, and you can
press 'Start PBC' button to try again.
If you have wireless access point's WPS PIN code, you
can input it here and press 'Start PIN' button to start to
establish PIN-style WPS connection.
41