In 'IP address' field, please fill in any IP address that begins with
5.
'192.168.2', and ends with a value greater than 2 and less than 254 (You
can use the example in the picture '192.168.2.239'). In Subnet mask field,
please fill '255.255.255.0'. Please keep all other fields empty, and click
'OK'.
If you changed the IP address of this IP camera and you forgot it, there're 2
methods to recover it:
a. Press and hold the 'Reset' button located at the bottom of this IP
camera, to clear all settings of the IP camera and reset the IP address
back to 192.168.2.3. You'll lose all settings in the IP camera.
b. Ask the network administrator to check the DHCP release table, if the
camera was set to obtain the IP address by DHCP, a new record will
be added to the DHCP release table on the DHCP server. (when the
IP camera is connected to the local area network)
DG-SC2600/DG-SC2600W User Manual
17