Table of Contents
Advertisement
Secondary DNS
Web Port
Enable PPPoE
User Name
Password
MTU
Click 'Apply' to save settings and make the new settings take effect.
DG-SC2600/DG-SC2600W User Manual
Specify the IP address of backup DNS server here.
When primary DNS is unreachable, IP camera will use
the IP address specified here as DNS server.
This field is optional.
Specify the port number of web management interface
here. If it's not 80, you'll have to add ': port' after the IP
address / hostname of this IP camera.
For example, if the HTTP port number you specified here
is 90 and the IP address of IP camera is 10.20.20.30,
then you have to input 'http://10.20.20.30:90' in the
address bar of Internet explorer.
Select 'Enable' to activate PPPoE function of this IP
camera, select 'Disable' to disable it.
Input the PPPoE username assigned by your ISP here.
Input the PPPoE password assigned by your ISP here.
Input the MTU (Maximum Transmission Unit) given by
your ISP here. Ask your ISP if you don't know what value
you should input here. Default value '1392' should work
with most of ISPs and will give you a nice network
performance.
37
Hide quick links:
Advertisement
Table of Contents
