Feature Descriptions; Menu 1 - Basic - Python 513 Installation Manual

Feature descriptions

The features of the system are described below. Features that have additional
settings only when programming with the Bitwriter® are indicated by the follow-
ing icon:
Default settings are in bold. The numbers in parentheses indicate the number
of times the Status LED flashes.

➤ Menu 1 - Basic

1-1 Active/Passive Arming:
When active arming, the system arms only when
the transmitter is used. When set to passive, the system arms automatically 30
seconds after the last door is closed. To alert the consumer of passive arming,
the siren chirps 20 seconds after the door is closed. This provides the consumer
with an audible warning prior to the system actually arming. At the 30 second
mark, the system arms, but the siren does not chirp.
1-2 Chirps On/Off:
This feature controls the chirps that confirm the arming and
disarming of the system.
1-3 Ignition Lock On/Off:
When turned On, the doors lock 3 seconds after the
ignition is turned On.
1-4 Ignition unlock On/Off: When ON this feature unlocks the doors when the
ignition is turned Off
1-5 Active/Passive Locking: If passive arming is selected in Feature 1-1, then
the system can be programmed to either lock the doors when passive arming oc-
curs, or only lock the doors when the system is armed via the transmitter. Active
locking means the system will not lock the doors when it passively arms. Passive
locking means that the system will lock the doors when it passively arms.
Note: Remember, when passive arming is selected, the unit will chirp 20 sec-
onds after the last door is closed. The system does not actually arm or lock the
doors until 30 seconds after the door has been closed.
46
© 2009 Directed Electronics. All rights reserved.