Menu 2 - Advanced - Python 513 Installation Manual

Car security
Hide thumbs Also See for 513:
Table of Contents

Advertisement

➤ Menu 2 - Advanced

2-1 SIREN DURATION 30/60 SECONDS:
It is possible to program the
unit to sound for 30 or 60 seconds during the triggered sequence. Some states
have laws regulating how long a security system can sound. When using the
Bitwriter®, the siren can be programmed to sound for any length of time from 1
second to 180 seconds.
2-2 NUISANCE PREVENTION® CIRCUITRY (NPC) ON/OFF: NPC stops re-
peated triggering of the same zone. If one zone is triggered three times in one
hour, that zone is bypassed for one hour, starting from the time of the third trig-
ger. During that hour, if the system sees a trigger on that zone again, the system
resets the one hour timer. If one hour passes and the zone has not triggered
again, the zone is activated and can trigger the system again. NPC only moni-
tors sensor inputs, and does not bypass the door trigger or the ignition trigger at
any time. If NPC is turned off, the system will respond to repeated triggers on
the sensor inputs and will do so indefinitely. Some states have laws regulating
how many times a security system can trigger before it is considered a nuisance
and the vehicle is towed away.
2-3 PROGRESSIVE DOOR TRIGGER ON/OFF: The system responds to a door
trigger input with a progressive response. When the door is opened with the
system armed, the siren will chirp 10 times prior to the full triggered sequence.
The door trigger is still treated as an instant trigger and closing the door quickly
will not prevent full triggered sequence from occurring. If the progressive door
trigger is programmed off, the full siren output will occur the moment the door
is opened.
2-4 VALET DISARM PULSE COUNT 1 TO 5 PULSES: The system can be pro-
grammed to count the number of presses of the valet switch before disarming
the security system. The factory default setting is one pulse. The unit can also be
set for two to five pulses.
Ghost Switch option: For added security, the GRAY wire on the two-pin Valet/
Program plug can be connected to any switch in the vehicle that provides a
positive (+) momentary pulse.
49
© 2009 Directed Electronics. All rights reserved.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents