Status Led - Python 513 Installation Manual

➤Status LED

Things to remember when positioning the Status LED:
• It should be visible from both sides and the rear of the vehicle, if pos-
sible.
• It needs at least 1/2-inch clearance to the rear.
• It is easiest to remove a small panel, such as a switch blank or a dash
bezel, before drilling a 9/32-inch hole.
• Use quick-disconnects near the LED wires if the panel is removable. This lets
mechanics or other installers remove the panel without cutting the wires.
© 2009 Directed Electronics. All rights reserved.
11