System Features Learn Routine - Python 513 Installation Manual

System features learn routine

The System Features Learn Routine dictates how the unit operates. It is possible to
access and change any of the feature settings using the Valet/program switch,
however this process can be simplified using the Bitwriter®.
Any of the settings can be changed and then assigned to one of four remote
controls. This feature is called Owner Recognition. Each time a particular re-
mote control is used to disarm the system, the assigned feature settings are
recalled. Owner Recognition is only possible when programming the unit via
the Bitwriter®.
If programming with the Bitwriter®, the learn routine can be locked or
unlocked. If the learn routine has been locked using the Bitwriter, it
must be unlocked with Bitwriter® - this cannot be done manually with
the Valet switch.
© 2009 Directed Electronics. All rights reserved.
1. Open a door. (The GREEN wire, H1/8 or the
VIOLET, H1/6 must be connected.
2. Ignition. Turn the ignition On, and then Off.
3. Select a Menu. Press and hold the Valet Program
switch. When the LED flashes once and the siren
chirps, Menu One is selected. Continue to hold the
switch until the LED flashes twice and the siren chirps
twice, Menu Two is selected. Release the switch af-
ter the menu choice has been selected.
41