Python 513 Installation Manual page 37

Step
Auto Learn Standard Configuration (default)
1
The auto learn configuration automatically sets up the remote but-
ton configuration.
Delete remotes: This feature erases all remotes from the system
2
memory. This is useful in cases when a customer's remote is lost or
stolen. Note: Does not reset the programmed features of the system
or reset the Virtual Tach setting.
Reset Features: This resets all the features of the system to the fac-
3
tory default settings. Note: Does not delete the remotes from the
system or reset the Virtual Tach setting.
4 Virtual Tach Reset: Deletes all previously learned values for Virtual
Tach, and on the next remote start sequence the unit begins virtual
tach initialization. Note: The "Zap" feature on the Bitwriter does
not reset the Virtual tach setting.
© 2009 Directed Electronics. All rights reserved.
4.Transmit. While holding the Valet/Program switch,
press the button on the remote control. The siren
chirps to confirm that the code has been success-
fully programmed. It is not possible to teach a re-
mote control button to the system more than once.
5. Release. Once the code is learned, the Valet/Program
switch can be released.
You can advance from programming one channel to an-
other by releasing the Valet/Program switch and tapping
it to advance channels and then holding it.
Function
37