Python 5706P Owner's Manual
  1. Manuals
  2. Brands
  3. Python Manuals
  4. Car Alarm
  5. 5706P
  6. Owner's manual

Python 5706P Owner's Manual

Security and remote start system
Hide thumbs
Table of Contents

Advertisement

Quick Links

Advertisement

Table of Contents
loading

Related Manuals for Python 5706P

Summary of Contents for Python 5706P

  • Page 2: What You Get

    Congratulations Congratulations on the purchase of your state-of-the-art security and re- mote start system. Reading this Owner’s Guide prior to using your sys- tem will help maximize the use of your system and its many features. Please visit: www.pythoncarsecurity.com – For general and additional guide information.

  • Page 3: Important Information

    Important information Government Regulations and Safety information Read the Government Regulations and Warning! Safety First sections of this manual prior to operating this system. Warning! Failure to heed this information can result in death, personal injury or property damage and may also result in the illegal use of the system beyond its intended purpose.

  • Page 4: Table Of Contents

    Contents Getting Started ....................4 Charging the remote control: ..............4 Keys to using this manual ..............5 Responder LC 2-Way................... 6 Status Screen Icons ....................8 Using your System ..................... 11 Commands and Confirmations ............11 Performing Commands ............... 11 Responder LC Command table ............
  • Page 5 Main Menu ....................... 24 Setup Remote menu: ................24 Remote Start Info ................25 Runtime Alert ..................26 Car 2 ....................26 Screen Color ..................26 Temp Unit ..................26 Button Beep..................27 System Type ..................27 Clock Set ..................27 Review .....................
  • Page 6 Remote and System Operations ................40 Passive Arming* ................40 Auto Re-arming* ................40 Valet Mode ..................41 Power Save ..................41 Rapid Resume ................... 41 Automatic Remote Updates ..............41 Out of Range ..................42 No Remote Output ................42 Feature not Available .................

  • Page 7: Getting Started

    Getting Started Your Responder LC remote is powered by an internal rechargeable battery that can only be serviced by an authorized Directed dealer. Due to transit and storage time prior to your purchase, the battery charge may have depleted. To ensure proper operation, check the battery level and connect the battery charger if not fully charged.

  • Page 8: Keys To Using This Manual

    Keys to using this manual Specific actions (in bold type) and style conventions are used consis- tently throughout this manual, they are as follows: Press: implies pushing in and releasing a button. Hold: is used after Press actions when a button needs to be held in position for an extended period of time, typically several sec- onds.

  • Page 9: Responder Lc 2-Way

    Responder LC 2-Way Internal Antenna Display Command Function Button Buttons Mini USB Port Feature Description Internal Antenna Used for transmitting and receiving information Display Status screen - the upper portion of the display contains status icons for the System, Siren, Alarm zones, Remote Start and Remote Control.
  • Page 10 Control Center Control button Status LED The Control Center, typically located on the upper part of the front windshield sends and receives commands or messages to and from your system. It consists of: The In-vehicle system antenna, for 2 way communication. The Status LED, as a visual indicator of the system’s status.

  • Page 11: Status Screen Icons

    Status Screen Icons Status Screen Icons Text Field The table below describes all the status screen icons. Icon Description Armed: The system is Armed, the alarm is enabled. Locked: The system is Locked in Valet, the alarm is disabled. Disarmed: The system is Disarmed, the alarm is disabled. Unlocked: The system is Unlocked in Valet, the alarm is dis- abled.
  • Page 12 Icon Description Smart Start is On; Remote Start is On. Note: When the icon is without an arrow head: Smart Start is On; Remote Start is Off. Manual Transmission Start mode is enabled, the engine can be started Displays the vehicle interior temperature On during Remote Start after performing the Defogger On command On during Warn-away and Full Trigger message output...
  • Page 13 Icon Description Bars indicate battery level is Full, ¾,½,¼ or Empty On while the remote control is transmitting a command On while the remote control is receiving a message On with Out of Range fault tone to indicate the remote failed to receive a command confirmation Pager on: The remote will wake up to listen for messages Pager off: The remote will not wake up to listen for messages...

  • Page 14: Using Your System

    Using your System Commands and Confirmations Commands, Basic or Advanced, are used to activate system features and are performed by pressing one of the Command buttons. Basic commands control the most often used security and remote start fea- tures while Advanced commands control more specialized features and request reports.

  • Page 15: Responder Lc Command Table

    Responder LC Command table Direct Access Level Button LEVEL 1 LEVEL 2 LEVEL 3 LEVEL 4 Arm/Lock Silent Arm Sensor Sensor Silent Full Silent (Panic) Bypass Disarm/Unlock Silent Disarm Remote Valet Car Finder Remote Start Runtime Timer Start Smart Start Defogger Reset Aux/Trunk...
  • Page 16 ** Remote Start feature not available when the Remote Start status is incorrect upon receiving the command. (Example: Runtime reset command received when remote start is off) Refer to the notes included in the command descriptions that ad- dress these faults or go to “Remote Start Error” on page 39 for more details.

  • Page 17: Basic Commands (Direct Access)

    Basic Commands (Direct Access) Press and release 6:30 The alarm arms, doors lock (if connected), and the siren chirps and parking lights flash once. The text and beeps play ARMED to confirm and the System Status Icons update. If Valet mode* is On, the doors lock and the text and tone play.

  • Page 18: Aux/Trunk

    AUX/Trunk Press and hold The Trunk opens (if connected) when this button is pressed for 2 sec- onds. The text and tones play to confirm. TRUNK Remote Start Press and release Activates (or if On, deactivates) the remote starter. The engine and parking lights turn On and the text and tones play, REMOTE START ON...

  • Page 19: Advanced Commands: (Level 1)

    Advanced Commands: (Level 1) Press and release the button 1 time. level 1 Silent Arm Press and release The alarm arms, doors lock (if connected), and the parking lights flash once. The text plays to confirm and the System Status SILENT ARMED icons update.

  • Page 20: Runtime Reset

    Runtime Reset Press and release If more time is needed while remote start is active, runtime reset will reset the runtime counter to the pre-programmed setting. The text and tones play to confirm. The text field will update RUNTIME if set to display runtime. Note Remote Start must be On to use this feature.

  • Page 21: Advanced Commands: (Level 2)

    Advanced Commands: (Level 2) Press and release the button 2 times. Sensor Bypass level 2 Press and release The parking lights flash each time this command is received to indicate the Sensor bypass type. 2 flashes indicates sensor Warn-away zones are bypassed.

  • Page 22: Timer Start

    Timer Start* Press and release Activates (or if On, deactivates) Timer Start. The parking lights flash quickly four times for On and slowly four times for Off. The text and beeps play to con- TIMER START ON TIMER START OFF firm and the Remote start status icons update.

  • Page 23: Advanced Commands: (Level 3)

    Advanced Commands: (Level 3) Press and release the button 3 times. level 3 Sensor Silent Arm* Press and release The alarm arms, doors lock, the siren chirps and parking lights flash 3 times. The text and beeps play to confirm and the SENSOR SILENT ARM System and Siren Status icons update.

  • Page 24: Smart Start

    Smart Start** Press and release Activates (or if On, deactivates) Smart Start. The parking lights flash quickly five times for On and slowly five times for Off. The text and beeps play to con- SMART START ON SMART START OFF firm and the Remote start status icons update.

  • Page 25: Advanced Commands: (Level 4)

    Advanced Commands: (Level 4) Press and release the button 4 times. Full Silent Arm* level 4 Press and release The alarm arms, doors lock, and the siren chirps and parking lights flash 4 times. The text and beeps play to confirm FULL SILENT ARM and the System and Siren Status icons update.

  • Page 26: Responder Lc Configuration

    Responder LC Configuration Operations of the Responder LC and how it communicates messages are set in the configuration Main Menu. Navigating menus and options Navigating menus and features, changing options, and exiting are performed using the remote control buttons. The following instructions discuss how to access and configure the settings.

  • Page 27: Main Menu

    Main Menu The following Main Menu list of features is available for configuration of the remote control. Setup Remote menu: Keypad Lock Options: AUTO When , the buttons do not lock and always perform a com- mand when pressed. When set to , the remote buttons AUTO lock after a 20 second lapse between buttons presses to prevent...

  • Page 28: Remote Start Info

    Off after 72 hours if the remote control is not used during this period. Just press any button to resume system monitoring. When set to it wakes up every few seconds to listen for pages from the system. When set to it does not wake up to receive remote start or alarm trigger pages.

  • Page 29: Runtime Alert

    Runtime Alert Options: The main unit will send a page to alert you when the runtime is about to expire. When set to , an alert is generated when the Remote Start Time-out message is received. When , no alert output is emitted for the message. Car 2 Options: HOME...

  • Page 30: Button Beep

    Button Beep Options: When set to , the remote will emit a beep as confirmation of a button press. When set to , beeps are not emitted for button presses. System Type Options: Selects the type of system, namely; Security or Remote Keyless Entry to which the remote has been paired, and adjusts the text and main menu accordingly.

  • Page 31: Pair Remote

    Pair Remote: Remote Pair is a process where the Responder LC and the system in the vehicle learn each others encrypted identification, securing their communication from intruders. Please note that your remote controls come pre-programmed from the factory. Prepare the vehicle system to be Paired with a new remote Open at least one of the vehicle’s doors.

  • Page 32: Demo Mode

    Demo mode: Demo Mode plays a pre-selected group of animations as a demon- stration tool to show friends or family. Running Demo mode shortens the battery life over time if used excessively : The remote will display a selection of icons on SINGLE SILENT the status screen without beeps and tones then stop : The remote will display a selection of icons on...

  • Page 33: Alarm Features

    Alarm Features Normal Arm Protection Status LED: The Control Center Status LED flashes as a visual indicator that your vehicle’s security system is active. Starter Kill: The Failsafe starter kill relay prevents the engine from starting Note May require additional parts and installation Sensor triggers: The shock sensor can distinguish minor impacts from major impacts to the vehicle exterior.

  • Page 34: Full Silent Arm Protection

    Full Silent Arm Protection Sensor Warn-away, Sensor Full Trigger and Point of Entry activations will only send messages to the remote, with parking light flash and siren outputs defeated. Sensor Warn-away Messages When the remote receives a Sensor Warn-away message it emits 10 beeps (if on) and displays a sensor zone specific SENSOR WARN text for 30 seconds.

  • Page 35: Trigger Zone Fault Report

    Trigger Zone Fault Report When armed by remote command the system runs a status check of the alarm trigger zones. Faulty zones (usually caused by dome light delay or open trunk) are bypassed and reported via the control center LED and remote, while all other trigger zones remain active and are monitored to protect the vehicle.

  • Page 36: Alarm Report When Requested

    Table of Zones Zone # (led flashes) Zone Name Trunk Shock Sensor Door Sensor 2 Ignition Hood Alarm Report when requested The Alarm Report displays the two most recent alarm triggers depend- ing on the system state when requested. When disarmed, the report will display text to identify the two most recent triggers since the ve- hicle was last driven.

  • Page 37: Remote Start Features

    Remote Start Features Pit Stop Mode To exit vehicle with engine running The system keeps the engine running during short trips into the house or convenience store. To perform Pit Stop: With the engine running, set the parking brake and release the foot brake.

  • Page 38: Remote Start Safe-Lock

    then after a few seconds the remote plays the REMOTE START OFF message. The vehicle is ready to drive. Remote Start Safe-lock Remote start safe-lock makes sure the doors are locked while the en- gine is running and after, even if they are unlocked when remote start is activated.

  • Page 39: Temperature Reporting

    Timer Start operation Activation begins a countdown timer as set by the installer (de- fault 3 hours). When the timer expires the engine starts and the message is sent to the remote control. When the REMOTE START ON Remote start runtime expires the engine shuts off, the REMOTE START OFF message is sent to the remote control and the countdown timer restarts.

  • Page 40: Remote Start Time-Out Alert

    Note Temperature report must be turned on by an authorized Di- rected dealer. Remote Start Time-out Alert During remote start a message is sent three minutes before and again at one minute before the engine turns off. The text plays RUNTIME LOW with tones as an alert to reset the runtime if desired.

  • Page 41: Turbo Timer Mode

    Exit the vehicle, close all the doors and arm the system. The engine turns off and after a few seconds, the REMOTE START OFF message plays to confirm. If the door is opened in Step 3 then the engine continues to run. Turbo Timer Mode The system keeps the engine running for the Turbo Timer runtime and can be activated by remote control or optional dash mounted activa-...

  • Page 42: Remote Start Error

    Remote Start Error For user safety, the system must be properly configured or remote start will not activate. Refer to the table below for the screens and parking light flashes that will identify the configuration issue and resolution. Flashes * Possible Fault Solution Brake on...

  • Page 43: Remote And System Operations

    Remote and System Operations Passive Arming* Park and exit the vehicle, after the doors are closed the Passive arm- ing countdown begins. The led flashes quickly and upon reaching 20 seconds the siren then chirps once. At 30 seconds the system arms itself.

  • Page 44: Valet Mode

    Valet Mode Valet mode can be entered and exited by performing the Remote Valet command or manually using the vehicle key and the control button. When entered, the alarm functions are defeated while the conve- nience features still operate normally. Arm and Disarm commands lock and unlock the doors while the text and beeps play to confirm.

  • Page 45: Out Of Range

    Out of Range Each time a command is performed the remote will expect a com- mand confirmation from the system. If a command confirmation is not received the out-of-range icon ( ) and a fault tone will play as an alert.

  • Page 46: 1-Way Companion Remote Control

    1-way Companion Remote Control Antenna Transmit LED Command Buttons Function Button Direct Access Level Button LEVEL 1 LEVEL 2 LEVEL 3 LEVEL 4 Arm/Lock Silent Arm Sensor Sensor Silent Full Silent (Panic) Bypass Disarm/ Silent Disarm Remote Valet Car Finder Unlock Remote Start Runtime...

  • Page 47: Accessing Commands

    Using the 1 way companion remote The companion 1 way remote commands the system features as shown in the previous table, but without the message display of the Responder LC remote. Siren chirps and parking light flashes are used to indicate that a command has been received and activated as de- scribed in the Basic and Advanced command sections.

  • Page 48: Programming

    Programming To enter; hold the button for 8 seconds, the remote emits one long beep and turns the LED on, the programming main menu has been accessed. To exit; press and release the button to go back and repeat to exit. 1 short and 1 long beep is emitted for each step back, the LED turns off when programming is exited.

  • Page 49: System Expansion Options

    System Expansion Options Controlling two vehicles (Car Select) The Responder LC and 1way companion remote can control systems in two different vehicles saving the need for multiple remote controls. This feature also allows for customized system configurations on each vehicle that has more than one driver. See Owner Recognition follow- ing for details.
  • Page 50 Driver door priority unlocking The door unlocking operation can be configured to emulate an OEM style of driver priority unlocking for added security during disarming. Auxiliary Channels The Auxiliary Channel outputs of this system can activate many of the convenience features found in today’s vehicles. Once a command is performed to activate a convenience feature the Responder LC dis- plays text that matches the feature.

  • Page 51: Battery Information (Responder Lc)

    Battery Information (Responder LC) The Responder LC remote control is powered by an internal recharge- able battery that can be serviced only through an authorized Directed Electronics dealer. The information and precautions in this section can help maximize your battery’s life and usage in providing your Re- sponder LC remote control with many years of trouble free operation.

  • Page 52: Battery Life

    be charged at the earliest opportunity or failure to control the system may occur. Low Battery Alerts When disarming the system using a remote with a low battery the siren will emit one additional chirp as an alert. If confirmation chirps are programmed off, the system will still emit one chirp as an alert when disarming.

  • Page 53: Battery Information (1-Way)

    Battery Information (1-Way) The 1way companion remote is powered by one 3V coin cell lithium battery (PN CR-2032) that will last approximately one year under normal use. The operating range is reduced as the battery weakens. Low Battery Alerts When disarming the system using a remote with a low battery the siren emits one additional chirp as an alert even if confirmation chirps are programmed off.

  • Page 54: Glossary Of Terms

    Glossary of Terms Document Terminology Control Module The “brain” of your system. Usually hidden underneath the dash area of the vehicle. It houses the microprocessor which monitors your vehicle and controls all of the system’s func- tions. Responder LC (2-way A hand-held, remote control which operates the various func- Remote Control) tions of your system and receives messages and pages from...

  • Page 55: Patent Information

    Patent Information This product is covered by one or more of the following United States patents: Remote Start Patents: 5,349,931; 5,872,519; 5,914,667; 5,952,933; 5,945,936; 5,990,786; 6,028,372; 6,467,448; 6,561,151; 7,191,053; 7,483,783 Vehicle Security Patents: 5,467,070; 5,532,670; 5,534,845; 5,563,576; 5,646,591; 5,650,774; 5,673,017; 5,712,638; 5,872,519; 5,914,667; 5,952,933;...

  • Page 56: Government Regulations

    Government Regulations This device complies with Part 15 of FCC rules. Operation is subject to the fol- lowing two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesirable operation. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules.
  • Page 57 Control Center To satisfy FCC RF exposure compliance requirements, the device and its an- tenna must maintain a separation distance of 20 cm or more from the person’s body, except for the hand and wrists, to satisfy RF exposure compliance. This device complies with the Industry Canada Radio Standards Specification RSS 210.

  • Page 58: Warning! Safety First

    Warning! Safety First Please read the safety warnings below before proceeding. Improper use of the product may be dangerous or illegal. Installation Due to the complexity of this system, installation of this product must only be performed by an authorized Directed dealer. If you have any questions, ask your retailer or contact Directed directly at 1-800-753-0600.
  • Page 59 Before remote starting a manual transmission vehicle, be sure to: Leave the vehicle in neutral and be sure no one is standing in front or behind the vehicle. Only remote start on a flat surface Have the parking brake fully engaged WARNING! It is the responsibility of the owner to ensure the parking/emer- gency brake properly functions.

  • Page 60: Interference

    GEAR IS CONTRARY TO ITS INTENDED MODE OF OPERATION. OPER- ATING THE REMOTE START SYSTEM UNDER THESE CONDITIONS MAY RESULT IN PROPERTY DAMAGE OR PERSONAL INJURY. YOU MUST IMME- DIATELY CEASE THE USE OF THE UNIT AND SEEK THE ASSISTANCE OF AN AUTHORIZED Directed DEALER TO REPAIR OR DISCONNECT THE IN- STALLED REMOTE START MODULE.

  • Page 61: Limited Lifetime Consumer Warranty

    Limited lifetime consumer warranty Directed Electronics. (“Directed”) promises to the original purchaser to repair or replace (at Directed’s election) with a comparable reconditioned model any Directed unit (hereaf- ter the “unit”), excluding without limitation the siren, the remote transmitters, the associated sensors and accessories, which proves to be defective in workmanship or material under reasonable use during the lifetime of the vehicle provided the following conditions are met: the unit was purchased from an authorized Directed dealer, the unit was professionally...
  • Page 62 ANY CONSEQUENTIAL DAMAGES OF ANY KIND. IN THE EVENT OF A CLAIM OR A DISPUTE INVOLVING DIRECTED OR ITS SUBSIDIARY, THE VENUE SHALL BE SAN DIEGO COUNTY IN THE STATE OF CALIFORNIA. CALIFORNIA STATE LAWS AND APPLICABLE FEDERAL LAWS SHALL APPLY AND GOVERN THE DISPUTE. THE MAXIMUM RECOVERY UNDER ANY CLAIM AGAINST DIRECTED SHALL BE STRICTLY LIMITED TO THE AUTHORIZED DIRECTED DEALER’S PURCHASE PRICE OF THE UNIT.
  • Page 63 © 2012 Directed. All rights reserved.

This manual is also suitable for:

574

Table of Contents