Python 513 Installation Manual page 42

ing the Valet/Program switch the number of times it takes to move from the
feature you just programmed to the feature you want.
For example: If you just programmed Feature 1-2 in Menu One, and you then
want to program Feature 1-3 to Off: Release and then, press and release the
program switch once to advance from Feature 1-2 to Feature 1-3. Then press it
once more and hold it. The LED flashes in groups of 3, and the siren chirps to
confirm that you have accessed Feature 1-3.
The learn routine is exited when:
• The door is closed.
• The ignition is turned on.
• The Valet/Program switch is pressed too many times.
• More than 15 seconds elapses between programming steps.
One long siren chirp indicates that the Learn routine has been exited.
42
4. Choose. Within 10 seconds, press and release
the Valet/Program switch the number of times
corresponding to the feature number you want to
program, and then press and hold the switch.
(See Feature Menus.) After a second the LED flashes
and the siren chirps to indicate which feature is
accessed. For example, in Menu 3, a group of 5
flashes indicates access to the activation pulse set-
ting (Feature 3-5). The siren also chirps 5 times.
5. Transmit. The transmitter is used to select the de-
sired setting. Pressing
to the one chirp setting. Pressing
the setting to the 2 chirp setting (or chirps two or
more times for features with more than 2 settings) .
6. Release, the Valet/program switch.
You can advance between features by pressing and releas-
�������
© 2009 Directed Electronics. All rights reserved.
changes the feature
changes
�������