Aux 4, Horn, (H4) 2-Pin Connector - Python 513 Installation Manual

➤ AUX 4, Horn, (H4) 2-pin connector

H4/1 ORANGE/BLACK
This wire provides a (-) 200mA output whenever the transmitter button(s) control-
ling AUX 4 is pressed. (see also the Feature Descriptions section and previous
AUX 3 description)
H4/2
BROWN
This wire is a low current output (200mA) and can be hooked to the horn honk
wire in the vehicle. It can be programmed to sound only during full trigger, or
to be used as a siren output with arm/disarm chirps. Refer to System Features
Menu #1, Feature 13 for more information.
Sat mode,
bank selector
Category
Control
Toggles
Scan mode
© 2009 Directed Electronics. All rights reserved.
(-) 200 mA PROGRAMMABLE AUX 4 OUTPUT
Warning! Never use this wire to drive anything
but a relay or a low-current input, supplied out-
put is only 200mA. Connecting directly to a
solenoid, motor, or other high-current device
will cause the module to fail.
(-) 200mA HORN HONK OUTPUT
Warning! Never use this wire to drive anything
but a relay or a low-current input, supplied out-
Bank and
Tune mode
present
put is only 200mA. Connecting directly to a
indicator
indicator
solenoid, motor, or other high-current device
will cause the module to fail.
REW
1
11:53
CATEGORY CH
XM1-1 CH-001
FF PLAY/PROG
2 3
SCAN
VOL
Channel
and text
indicator
NR DISC- DISC+
4 5 6
SOUND
29