System Features Learn Routine - Python Responder LC Model 991 Installation Manual

For more information about the remote control functions, see the Owners
Guide.
Direct
Level
Access
Button
ARM/LOCK
(Panic)
DISARM/UN-
LOCK (Panic)
STARTER
ON/OFF
TRUNK
A U X
RELEASE (Red/
White)
Advance Level
Change Car
(3s) Enter
programming
(8s)
Important:
check and event report history, press the
fied amount of times, and then hold.

System features learn routine

The System Features Learn Routine dictates how the unit operates. It is possible to
access and change any of the feature settings using the Valet/program switch.
However, this process can be simplified by using the Bitwriter®. Any of the
settings can be changed and then assigned to one of four remote controls. This
feature is called Owner Recognition. Each time that particular remote control is
used to disarm the system, the assigned feature settings are recalled. Owner
Recognition is only possible when programming the unit via the Bitwriter®.
If programming with the Bitwriter®, the learn routine can be locked or
unlocked. If the learn routine has previously been locked, it must be
unlocked with Bitwriter® - this cannot be done manually with the Valet
switch.
38
x 1
SILENT ARM
SILENT DISARM
RESET RUNTIME
AUX 1
CABIN
TEMPERATURE
REQUEST
To access "Cabin temperature request, Runtime
x 2
SENSOR SILENT ALARM
BYPASS SENSORS
VALET ON/OFF CAR FINDER
TIMER MODE SMART START
ON/OFF
AUX 2
RUNTIME EVENT HISTORY
CHECK
button the speci-
© 2008 Directed Electronics. All rights reserved.
x 3
SILENT ALARM
ALL ZONES
DEFOGGER ON
ON/OFF
AUX 3
REPORT
x 4