Selecting The Input Source; Controlling Volume And Balance; Setting Tone Controls - IBM 715 P/N - 13H6715 User Manual

SELECTING THE INPUT SOURCE

You can control the input source the Multimedia Modem Plus uses. If you do not specify the
input source, you will not get any output audio signal. Click on the input source name or empty
blank next to each one to select it. You have the following input options or combination of
options to choose from:
MIC
LINE
CD
MIC and LINE
CD and LINE

CONTROLLING VOLUME AND BALANCE

You can control the volume, and balance contribution of each sound type (INPUT SOURCE,
GAMES, WAVE, and MIDI). For the audio output signal you control the combined signals from
all the inputs using the MASTER control. To control the volume and balance on the Mwave
Audio Mixer
Window as follows:
Drag the volume control slider up or down.
Drag the balance control slider left or right.
Click on MUTE to mute a sound source.

SETTING TONE CONTROLS

You can change the tone controls of the audio output signal through changing the treble and bass
settings. To control the tone controls on the Mwave Audio Mixer Window:
Drag the treble control left or right.
Drag the bass control left or right.
Click on the empty blank for TONE CONTROL to enable the tone controls.
Page 28 of 47