Download Print this page

Installing The Software Under Os/2 Warp - IBM 715 P/N - 13H6715 User Manual

Ibm modem user manual
Hide thumbs

Advertisement

INSTALLING THE SOFTWARE UNDER OS/2 WARP

NOTE: The Multimedia Modem Plus software only supports OS/2 Warp Version 3.0 or higher.
NOTE: If you are upgrading from the Multimedia Modem or have any other Mwave software
installed in your computer, you must remove the old Mwave software to avoid conflicts with the
new Mwave software. The setup program that is part of your installation package should be used
to remove the old Multimedia Modem Mwave software from your hard disk drive.
The instructions in this section explain the installation and configuration process for the Mwave
software under OS/2 Warp
The setup program:
" Removes the Multimedia Modem Mwave software, if installed
" Installs the new software on your hard disk drive
" Configures your Multimedia Modem
" Creates the Multimedia Modem program desktop group
Follow this procedure to install the Multimedia Modem Plus software under OS/2 Warp:
1. Start OS/2 and verify that the IBM Multimedia Presentation Manager/2 (MMPM/2) is
installed in your computer. For information about MMPM/2, see your OS/2 user's manual.
2. Insert OS/2 Disk 1 in drive A.
3. Open an OS/2 window.
4. At the command prompt, type: A:\SETUP and press ENTER.
The Setup program takes some time to initialize.
NOTE: If you had a Multimedia Modem previously installed in your computer, you are asked
if you want to continue and overwrite the previous installation. Click on YES.
NOTE: If you are upgrading from the Multimedia Modem or have any other Mwave software
installed in your computer, you must remove the old Mwave software to avoid conflicts with
the new Mwave software. The setup program that is part of your installation package should
be used to remove the old Multimedia Modem Mwave software from your hard disk drive.
5. Select one of the following installation types:
" Select the complete installation option to install all Mwave software and continue with 6.
Complete installation is the normal selection for new installations or upgrading from
Multimedia Modem.
" Select the selective installation option if you only want to install part of the Mwave
software. Clear the selection boxes for the software you do not want to install. Some of
the following windows might not apply depending on the components you choose for
your selective installation.
" Select the uninstall option if you want to remove the Multimedia Modem software from
your computer. If you ever remove the Multimedia Modem Plus adapter from your
computer, you must use the uninstall process to be sure that the Mwave software is
removed from all directories on your hard disk drive.
Page 13 of 47

Advertisement

loading

  Related Manuals for IBM 715 P/N - 13H6715