SETTING MWAVE DISCRIMINATOR OPTIONS
You control the functions the discriminator performs by the options you set from the Mwave
NAVIGATE: From the Multimedia Modem, go to Mwave Discriminator and click on
The Mwave Discriminator Window displays.
The Options drop down menu consists of:
If you subscribe to Caller ID through your specific telephone company, you can use this
function to route voice calls directly to the appropriate application.
You can give a caller voice instructions for them to specify if they are sending you a fax or
You can have the Multimedia Modem play a message if you did not start an application for
the incoming call type.
Always on Top
If you want to see the Mwave Discriminator Window at all times, select OPTIONS in the Mwave
Discriminator Window and click on ALWAYS ON TOP.
CALLER ID IDENTIFICATION
The discriminator can route a call directly to the application for a call type based on the caller's
telephone number. If you subscribe to your telephone company Caller ID feature, then you can
enter the caller's telephone number and call type (voice, fax, or data) in your caller identification
(Caller ID) database. If the phone number of the incoming call matches an entry in the database,
the call is routed to the application type associated with the telephone number.
NAVIGATE: From the Mwave Discriminator, go to the Options drop down menu and click on
The Call Types by Caller ID Window displays.
You can add, edit and delete caller's telephone number and identification information using the
Caller ID Window. Specify the call type for each caller's telephone number. The types are:
Don't Answer (a circle with a line through it)
Page 22 of 47