Patrol Control - Lorex LN Series Instruction Manual

Patrol Control

You can set up to four patrol tours composed of up to eight preset positions. The camera will move
to the programmed positions sequentially.
Figure 18.5 Patrol Control menu
To set a patrol tour:
1. Select a Tour Number (e.g. Tour1).
2. Under Tour Position, select an Order number
from the Order drop-down menu (first will be
the default position). Order refers to the
position in the Position Number List (see
figure 6.9).
3. Select a preset position from the Select Pos.
drop-down menu.
4. Under Waiting Time, enter a time (from 1~99
seconds) for the camera to pause on the
position. Select the box to make the tour your
default patrol tour.
5. Click Set. The position appears in the Preset
Position List (see figure 6.9).
6. Repeat steps 1~5 until you have completed
the tour (each tour can have up to 8
positions).
7. Under Tour Name, enter a name for your tour or leave as default (Guard Tour 1).
8. Click Submit Patrol. Please allow a few moments for the PTZ camera to update with the new
patrol tour.
66
Figure 18.6 Saved Patrol Tour