Controlling Ptz; Lnz4001 - Lorex LN Series Instruction Manual

CONTROLLING PTZ

LNZ4001

ATTENTION: This section applies to LNZ4001 Series cameras only.
To use PTZ (Pan, Tilt, Zoom) functions:
1. Open DigiViewer in your default browser.
2. Log in to your camera using your user name and password (by default, admin / admin).
3. Click at the bottom of the main display screen. The PTZ Control pane appears on the left
side of the main display screen.
4. Use the navigation arrows to position the camera.
NOTE: Zoom will not be saved as part of the preset.
1
2
3
Figure 7.0 PTZ Control pane
18
4
1. Set: Open Preset and Patrol
Control pane.
-
2. : Zoom out.
3. Navigation: Pan and tilt the
camera.
+
4. : Zoom in.