EVENTS
Use the Events menu to configure options and settings for Motion Events, HTTP Events, PTZ
options, and Alarm input/output.
NOTE: PTZ and alarm input/output is applicable to LNZ4001 Series models
To open the Event menu:
• Click Events in the DigiViewer main window.
Figure 18.0 Events menu (by default, Motion Events menu)
Motion Events
Use the Motion Events menu to configure motion detection and email notification.
To enable motion detection:
1. Under Motion Event Trigger, select Enable Motion Detection.
2. Under Motion Sensing configure the following:
• Motion Sensitivity: Enter a numeric range for motion sensitivity from 0 (no sensitivity) ~ 100
(very high sensitivity). By default, motion sensitivity is set to 90.
• Motion Threshold: Enter a value to increase or decrease the threshold before motion is
detected. The smaller the value, the more sensitive motion detecting.
• Motion Interval: Enter how many minutes in between the camera should send out motion
e-mail alerts.
3. Click Submit Motion to save your settings.
NOTE: You must enter SMTP information in order to send an email alert. For details, see "Outgoing Email
Server" on page 76.
To enable email alerts:
1. Under E-Mail Notification, select Enable.
2.
Optional
: Select Attach graphic image if you want to attach a JPEG to the email.
3. Enter the recipient address in the "To" field; subject and body text are optional.
4. Click Submit Motion.
Events
only
.
61